Re: [PATCH 2/6] drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/15/23 12:40, Adam Ford wrote:
According to Table 13-45 of the i.MX8M Mini Reference Manual, the min
and max values for M and  the frequency range for the VCO_out
calculator were incorrect.  This also appears to be the case for the
imx8mn and imx8mp.

To fix this, make new variables to hold the min and max values of m
and the minimum value of VCO_out, and update the PMS calculator to
use these new variables instead of using hard-coded values to keep
the backwards compatibility with other parts using this driver.

[...]

  static const struct samsung_dsim_driver_data imx8mm_dsi_driver_data = {
@@ -470,6 +485,9 @@ static const struct samsung_dsim_driver_data imx8mm_dsi_driver_data = {
  	 */
  	.pll_p_offset = 14,
  	.reg_values = imx8mm_dsim_reg_values,
+	.m_min = 64,
+	.m_max = 1023,
+	.vco_min = 1050,

You might want to call this 'min_freq' since there is a 'max_freq' which seems to indicate what VCO max frequency is.

Note that the same datasheet contains the following information:
"
MIPI_DPHY_M_PLLPMS field descriptions

12–4 PMS_M
Specifies the PLL PMS value for the M divider
NOTE: The programmable divider range should be within 25 to 125 to ensure PLL stability. NOTE: The M and P divider values should be considered together to ensure VCO ouput frequency
(VCO_out) range is between 350 MHz to 750 MHz.
Please refer to the topic DPHY PLL for more information.
"



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux