Add the binding description and the corresponding driver for the BD2606. Changes in V5: - remove "driver" from the binding subject line - avoid presenting shared brightness to the userspace by allowing only on/off in such cases. Changes in V4: - minor tuning of description in bindings Changes in V3: - binding cleanup - move active variable from long-living struct onto stack Changes in V2: - Add Datasheet link - use fwnode api - remove childnode count check, that will bail out anyways later. - add enable-gpios to binding but not to driver due to lack of testing ability Andreas Kemnade (2): dt-bindings: leds: Add ROHM BD2606MVV LED leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver .../bindings/leds/rohm,bd2606mvv.yaml | 81 +++++++++ drivers/leds/Kconfig | 11 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-bd2606mvv.c | 156 ++++++++++++++++++ 4 files changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml create mode 100644 drivers/leds/leds-bd2606mvv.c -- 2.39.2
