Add DT bindings documentation for gate-clock, which can gate its output. Signed-off-by: David Yang <mmyangfl@xxxxxxxxx> --- .../devicetree/bindings/clock/gate-clock.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/gate-clock.yaml diff --git a/Documentation/devicetree/bindings/clock/gate-clock.yaml b/Documentation/devicetree/bindings/clock/gate-clock.yaml new file mode 100644 index 000000000000..3c993cb7e9bb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gate-clock.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/gate-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock which can gate its output + +maintainers: + - David Yang <mmyangfl@xxxxxxxxx> + +description: | + Clock which can gate its output. + + The registers map is retrieved from the parental dt-node. So the clock node + should be represented as a sub-node of a "clock-controller" node. + + See also: linux/clk-provider.h + +properties: + compatible: + const: gate-clock + + '#clock-cells': + const: 0 + + clocks: + maxItems: 1 + description: Parent clock. + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the control register (in bytes). + + bits: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bit index which controls the output. + + clock-output-names: + maxItems: 1 + +required: + - compatible + - '#clock-cells' + - offset + - bits + +additionalProperties: false + +examples: + - | + gate-clock@cc.3 { + compatible = "gate-clock"; + #clock-cells = <0>; + offset = <0xcc>; + bits = <3>; + clock-output-names = "my-clk"; + }; -- 2.39.2
