On 16/04/2023 12:16, Artur Weber wrote:
This patches re-introduces the Exynos4212 platform and adds support
for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
- Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
- Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
- Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
What works:
- Display and backlight
- Touchscreen (without touchkeys)
- GPIO buttons, hall sensor
- WiFi and Bluetooth
- USB, fuel gauge, charging (partial)
- Accelerometer and magnetometer
- WiFi model only: light sensor
This patchset depends on "[PATCH 0/3] Add Samsung S6D7AA0 panel
controller driver" for the display panel support for the Samsung Galaxy
3 8.0 boards.
Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
Artur Weber (12):
dt-bindings: soc: samsung: add Exynos4212 PMU compatible
dt-bindings: clock: add Exynos4212 clock compatible
ARM: exynos: Re-introduce Exynos4212 support
soc: samsung: Re-introduce Exynos4212 support
clk: samsung: Add Exynos4212 compatible to CLKOUT driver
clk: samsung: Re-add support for Exynos4212 CPU clock
Revert "media: exynos4-is: Remove dependency on obsolete SoC support"
Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"
ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi
ARM: dts: Re-introduce Exynos4212 DTSI
dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards
ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
.../bindings/arm/samsung/samsung-boards.yaml | 10 +
.../bindings/clock/samsung,exynos-clock.yaml | 1 +
.../bindings/soc/samsung/exynos-pmu.yaml | 3 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/exynos4212-tab3-3g8.dts | 30 +
arch/arm/boot/dts/exynos4212-tab3-lte8.dts | 43 +
arch/arm/boot/dts/exynos4212-tab3-wifi8.dts | 25 +
arch/arm/boot/dts/exynos4212-tab3.dtsi | 1175 +++++++++++++++++
arch/arm/boot/dts/exynos4212.dtsi | 157 +++
arch/arm/boot/dts/exynos4412.dtsi | 645 +--------
...2-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} | 4 +-
arch/arm/boot/dts/exynos4x12.dtsi | 665 ++++++++++
arch/arm/mach-exynos/Kconfig | 5 +
arch/arm/mach-exynos/common.h | 8 +
arch/arm/mach-exynos/exynos.c | 2 +
arch/arm/mach-exynos/firmware.c | 8 +-
arch/arm/mach-exynos/pm.c | 2 +-
arch/arm/mach-exynos/suspend.c | 4 +
drivers/clk/samsung/clk-exynos-clkout.c | 3 +
drivers/clk/samsung/clk-exynos4.c | 44 +-
.../media/platform/samsung/exynos4-is/Kconfig | 2 +-
.../platform/samsung/exynos4-is/fimc-core.c | 2 +-
.../platform/samsung/exynos4-is/fimc-lite.c | 2 +-
drivers/phy/samsung/Kconfig | 2 +-
drivers/soc/samsung/exynos-pmu.c | 9 +
drivers/soc/samsung/exynos-pmu.h | 2 +
drivers/soc/samsung/exynos4-pmu.c | 13 +-
27 files changed, 2213 insertions(+), 656 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts
create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts
create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi
create mode 100644 arch/arm/boot/dts/exynos4212.dtsi
rename arch/arm/boot/dts/{exynos4412-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} (99%)
create mode 100644 arch/arm/boot/dts/exynos4x12.dtsi
