Re: [RFC PATCH 5/5] can: m_can: Add hrtimer to generate software interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13.04.2023 17:30:51, Judith Mendez wrote:
> Add a hrtimer to MCAN struct. Each MCAN will have its own
> hrtimer instantiated if there is no hardware interrupt found.
> 
> The hrtimer will generate a software interrupt every 1 ms. In

Are you sure about the 1ms?

> hrtimer callback, we check if there is a transaction pending by
> reading a register, then process by calling the isr if there is.
> 
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> ---
>  drivers/net/can/m_can/m_can.c          | 24 ++++++++++++++++++++++--
>  drivers/net/can/m_can/m_can.h          |  3 +++
>  drivers/net/can/m_can/m_can_platform.c |  9 +++++++--
>  3 files changed, 32 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 8e83d6963d85..bb9d53f4d3cc 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -23,6 +23,7 @@
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/hrtimer.h>
>  
>  #include "m_can.h"
>  
> @@ -1584,6 +1585,11 @@ static int m_can_close(struct net_device *dev)
>  	if (!cdev->is_peripheral)
>  		napi_disable(&cdev->napi);
>  
> +	if (dev->irq < 0) {
> +		dev_info(cdev->dev, "Disabling the hrtimer\n");

Make it a dev_dbg() or remove completely.

> +		hrtimer_cancel(&cdev->hrtimer);
> +	}
> +
>  	m_can_stop(dev);
>  	m_can_clk_stop(cdev);
>  	free_irq(dev->irq, dev);
> @@ -1792,6 +1798,19 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>  	return NETDEV_TX_OK;
>  }
>  
> +enum hrtimer_restart hrtimer_callback(struct hrtimer *timer)
> +{
> +	irqreturn_t ret;

never read value?

> +	struct m_can_classdev *cdev =
> +		container_of(timer, struct m_can_classdev, hrtimer);
> +
> +	ret = m_can_isr(0, cdev->net);
> +
> +	hrtimer_forward_now(timer, ns_to_ktime(5 * NSEC_PER_MSEC));

There's ms_to_ktime()....and the "5" doesn't match your patch
description.

> +
> +	return HRTIMER_RESTART;
> +}
> +
>  static int m_can_open(struct net_device *dev)
>  {
>  	struct m_can_classdev *cdev = netdev_priv(dev);
> @@ -1836,8 +1855,9 @@ static int m_can_open(struct net_device *dev)
>  	}
>  
>  	if (err < 0) {
> -		netdev_err(dev, "failed to request interrupt\n");
> -		goto exit_irq_fail;
> +		dev_info(cdev->dev, "Enabling the hrtimer\n");
> +		cdev->hrtimer.function = &hrtimer_callback;
> +		hrtimer_start(&cdev->hrtimer, ns_to_ktime(0), HRTIMER_MODE_REL_PINNED);

IMHO it makes no sense to request an IRQ if the device doesn't have one,
and then try to fix up things in the error path. What about this?

--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1831,9 +1831,11 @@ static int m_can_open(struct net_device *dev)
                 err = request_threaded_irq(dev->irq, NULL, m_can_isr,
                                            IRQF_ONESHOT,
                                            dev->name, dev);
-        } else {
+        } else if (dev->irq) {
                 err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
                                   dev);
+        } else {
+                // polling
         }
 
         if (err < 0) {

>  	}
>  
>  	/* start the m_can controller */
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> index a839dc71dc9b..ed046d77fdb9 100644
> --- a/drivers/net/can/m_can/m_can.h
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -28,6 +28,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/slab.h>
>  #include <linux/uaccess.h>
> +#include <linux/hrtimer.h>
>  
>  /* m_can lec values */
>  enum m_can_lec_type {
> @@ -93,6 +94,8 @@ struct m_can_classdev {
>  	int is_peripheral;
>  
>  	struct mram_cfg mcfg[MRAM_CFG_NUM];
> +
> +	struct hrtimer hrtimer;
>  };
>  
>  struct m_can_classdev *m_can_class_allocate_dev(struct device *dev, int sizeof_priv);
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> index 9c1dcf838006..53e1648e9dab 100644
> --- a/drivers/net/can/m_can/m_can_platform.c
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -7,6 +7,7 @@
>  
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/hrtimer.h>
>  
>  #include "m_can.h"
>  
> @@ -98,8 +99,12 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	addr = devm_platform_ioremap_resource_byname(pdev, "m_can");
>  	irq = platform_get_irq_byname(pdev, "int0");
>  	if (IS_ERR(addr) || irq < 0) {

What about the IS_ERR(addr) case?

> -		ret = -EINVAL;
> -		goto probe_fail;
> +		if (irq == -EPROBE_DEFER) {
> +			ret = -EPROBE_DEFER;
> +			goto probe_fail;
> +		}
> +		dev_info(mcan_class->dev, "Failed to get irq, initialize hrtimer\n");
> +		hrtimer_init(&mcan_class->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);

I don't like it when polling is unconditionally set up in case of an irq
error. I'm not sure if we need an explicit device tree property....

>  	}
>  
>  	/* message ram could be shared */
> -- 
> 2.17.1
> 
>

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux