All I2C nodes were disabled in SOC dts file and in board
dts needed nodes were enabled.
This patch enables wkup_i2c0 node in board dts file.
Fixes: a9ed915cd55c ("arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level")
Signed-off-by: Udit Kumar <u-kumar1@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 63633e4f6c59..e66bbfe65ff2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,6 +254,10 @@ exp3: gpio@20 {
};
};
+&wkup_i2c0 {
+ status = "okay";
+};
+
&main_sdhci0 {
/* eMMC */
non-removable;
--
2.34.1
