Loongson platform support spi hardware controller and this series patch was to add spi driver and binding support. Change in v2: 1. This [PATCH v2 1/2] dt-bindings patch need depend on clk patch: https:// lore.kernel.org/all/20230307115022.12846-1-zhuyinbo@xxxxxxxxxxx/ 2. Remove the clock-names in spi yaml file. 3. Add "loongson,ls7a-spi" compatible in spi yaml file. 4. Add an || COMPILE_TEST and drop && PCI then add some CONFIG_PCI macro to limit some pci code. 5. Make the spi driver top code comment block that use C++ style. 6. Drop spi->max_speed_hz. 7. Add a spin_lock for loongson_spi_setup. 8. Add a timeout and cpu_relax() in loongson_spi_write_read_8bit. 9. Add spi_transfer_one and drop transfer and rework entire spi driver that include some necessary changes. 10. Use module_init replace subsys_initcall. 11. About PM interface that I don't find any issue so I don't add any changes. Change in v3: 1. This [PATCH v3 1/2] dt-bindings patch need depend on clk patch: https:// lore.kernel.org/all/20230323025229.2971-1-zhuyinbo@xxxxxxxxxxx/ 2. Drop the unused blank line in loongson,ls-spi.yaml file. 3. Replace clock minItems with clock maxItems in yaml file. 4. Separate spi driver into platform module, pci module and core module. 5. Replace DIV_ROUND_UP with DIV_ROUND_UP_ULL to fix compile error "undefined reference to `__aeabi_uldivmod'" and "__udivdi3 undefined" that reported by test robot. 6. Remove the spin lock. 7. Clear the loongson_spi->hz and loongson_spi->mode in setup to fixup the issue that multiple spi device transfer that maybe cause spi was be misconfigured. Change in v4: 1. This [PATCH v4 1/2] dt-bindings patch need depend on clk patch: https:// lore.kernel.org/all/20230323025229.2971-1-zhuyinbo@xxxxxxxxxxx/ 2. Add "#include <linux/io.h>" in spi-loongson-core.c for fix the compile issue which devm_ioremap no declaration. 3. Add "EXPORT_SYMBOL_GPL(loongson_spi_dev_pm_ops)" in spi-loongson-core.c for fix the compile issue which loongson_spi_dev_pm_ops undefined. Change in v5: 1. Get rid of the clock patch's dependency and open-code the clock IDs. 2. Fixup checkpatch issue that by installed ply and gitpython package locally, but this series of patch's code doesn't have any change. Change in v6: 1. Remove the "#include <dt-bindings/clock/loongson,ls2k-clk.h>" in yaml file. Change in v7: 1. Remove the "loongson,ls7a-spi" and change yaml file name as "loongson,ls2k-spi.yaml". 2. Use module_pci_driver and module_platform_driver to replace module_init and module_exit. 3. Drop ".owner = THIS_MODULE" in spi platform driver. 4. Add devm_spi_alloc_master devm_spi_register_master to simplify code. 5. Add pci_disable_device() in loongson_spi_pci_unregister. Yinbo Zhu (2): dt-bindings: spi: add loongson spi spi: loongson: add bus driver for the loongson spi controller .../bindings/spi/loongson,ls2k-spi.yaml | 41 +++ MAINTAINERS | 10 + drivers/spi/Kconfig | 31 ++ drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 292 ++++++++++++++++++ drivers/spi/spi-loongson-pci.c | 72 +++++ drivers/spi/spi-loongson-plat.c | 47 +++ drivers/spi/spi-loongson.h | 41 +++ 8 files changed, 537 insertions(+) -- 2.20.1
