+ To: Catalin Marinas <catalin.marinas@xxxxxxx> + To: Will Deacon <will@xxxxxxxxxx> Sorry for the noise. Regards, Alexandre Le ven. 7 avr. 2023 à 14:59, Alexandre Mergnat <amergnat@xxxxxxxxxxxx> a écrit : > > This commits are based on the Fabien Parent <fparent@xxxxxxxxxxxx> work. > > The purpose of this series is to add the following HWs / IPs support for > the mt8365-evk board: > - Watchdog > - Power Management Integrated Circuit "PMIC" wrapper > - MT6357 PMIC > - MultiMediaCard "MMC" & Secure Digital "SD" controller > - USB controller > - Ethernet MAC controller > > Add CPU Freq & IDLE support for this board. > > This series depends to anothers which add support for MT8365 EVK board > [1], add the MT8365 I2C support [2] (both are currently applied) and > finally the pinctrl binding cleanup [3]. > > === Build: > > To test this serie, cherry-pick patches from the dependent series ([1],[2],[3]) > and the applied patches from this serie (documented in the "Changes" below). > Be carefull, the pinctrl serie [3] is rebased to linusw/linux-pinctrl, > cherry-pick will not be straightforward. > Finally, cherry-pick this serie. > > You can also take my branch [4] which have all the needed patches > retrieved from the instructions above. > > Use the arm64 defconfig to make the build. > > Regards, > Alex > > [1]: https://lore.kernel.org/all/20230309213501.794764-1-bero@xxxxxxxxxxxx/ > [2]: https://lore.kernel.org/all/20221122-mt8365-i2c-support-v6-0-e1009c8afd53@xxxxxxxxxxxx/ > [3]: https://lore.kernel.org/all/20230327-cleanup-pinctrl-binding-v3-0-6f56d5c7a8de@xxxxxxxxxxxx/ > [4]: https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support > > Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx> > --- > Changes in v5: > - Add patches to build the MT6357 regulator driver and MTK PMIC keys by default > - Remove "dt-bindings: pinctrl: mediatek,mt8365-pinctrl: add drive strength property" > patch from this serie and add it to the pinctrl serie [3] > - Link to v4: https://lore.kernel.org/r/20230203-evk-board-support-v4-0-5cffe66a38c0@xxxxxxxxxxxx > > Changes in v4: > - Remove v3 applied patch from the serie: > - arm64: dts: mediatek: add ethernet support for mt8365 SoC > - arm64: dts: mediatek: add mmc support for mt8365 SoC > - arm64: dts: mediatek: add mt6357 device-tree > - arm64: dts: mediatek: add pwrap support to mt8365 SoC > - arm64: dts: mediatek: Increase the size BL31 reserved memory > - Drop "arm64: dts: mediatek: fix systimer properties" which is done [1] > - Fix style, typo and re-order properties. > - Use interrupts-extended for the PMIC node. > - Link to v3: https://lore.kernel.org/r/20230203-evk-board-support-v3-0-0003e80e0095@xxxxxxxxxxxx > > Changes in v3: > - Remove v2 applied patch from the serie: > - dt-bindings: mmc: mediatek,mtk-sd: add mt8365 > - Add trailers and simply resend. > - Link to v2: https://lore.kernel.org/r/20230203-evk-board-support-v2-0-6ec7cdb10ccf@xxxxxxxxxxxx > > --- > Alexandre Mergnat (10): > arm64: defconfig: enable MT6357 regulator > arm64: defconfig: enable Mediatek PMIC key > dt-bindings: watchdog: mediatek,mtk-wdt: add mt8365 > arm64: dts: mediatek: add watchdog support for mt8365 SoC > arm64: dts: mediatek: add mt6357 PMIC support for mt8365-evk > arm64: dts: mediatek: add mmc support for mt8365-evk > arm64: dts: mediatek: add usb controller support for mt8365-evk > arm64: dts: mediatek: add ethernet support for mt8365-evk > arm64: dts: mediatek: add OPP support for mt8365 SoC > arm64: dts: mediatek: add cpufreq support for mt8365-evk > > Amjad Ouled-Ameur (1): > arm64: dts: mediatek: Add CPU Idle support > > Fabien Parent (1): > arm64: dts: mediatek: set vmc regulator as always on > > .../bindings/watchdog/mediatek,mtk-wdt.yaml | 1 + > arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 249 +++++++++++++++++++++ > arch/arm64/boot/dts/mediatek/mt8365.dtsi | 142 ++++++++++++ > arch/arm64/configs/defconfig | 3 + > 4 files changed, 395 insertions(+) > --- > base-commit: 4f2a499a344b36ebb325e610265452ea88541116 > change-id: 20230203-evk-board-support-d5b7a839ed7b > > Best regards, > -- > Alexandre Mergnat <amergnat@xxxxxxxxxxxx> >
