On 6.04.2023 19:51, Dmitry Baryshkov wrote: > On 06/04/2023 18:25, Konrad Dybcio wrote: >> Enable the onboard QCA Wi-Fi. HW identifiers for reference: >> qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000 >> >> Firmware sources: >> /vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn >> /vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin >> [3] -> ath10k/.../firmware-5.bin >> >> Not sure where 3 comes from on the device itself, gotta investigate that.. >> >> According to [4], it's called WCN3990_STRAIT. >> >> [1] XX = board_id printed when the file is missing or by your downstream >> kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin > > Since the board_id is 0xff, please add qcom,ath10k-calibration-variant Do I make up a name, or is there some convention? I see Johan used "LE_X13S" in commit 2702f54f400ad3979632cdb76553772414f4c5e3. Should I go with "LE_P11"? > > Ideally, could you please send the bdwlan to ath10k for inclusion, see https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles . The legal situation is ambiguous at best :/ Konrad > >> >> [2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README >> [3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin >> [4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55 >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> >> --- >> arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts >> index 2aac25171dec..4ba8e59a27d8 100644 >> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts >> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts >> @@ -315,6 +315,14 @@ &usb_hsphy { >> status = "okay"; >> }; >> +&wifi { >> + vdd-0.8-cx-mx-supply = <&pm6125_l8>; >> + vdd-1.8-xo-supply = <&pm6125_l16>; >> + vdd-1.3-rfa-supply = <&pm6125_l17>; >> + vdd-3.3-ch0-supply = <&pm6125_l23>; >> + status = "okay"; >> +}; >> + >> &xo_board { >> clock-frequency = <19200000>; >> }; >> >
