Enable the onboard QCA Wi-Fi. HW identifiers for reference: qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000 Firmware sources: /vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn /vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin [3] -> ath10k/.../firmware-5.bin Not sure where 3 comes from on the device itself, gotta investigate that.. According to [4], it's called WCN3990_STRAIT. [1] XX = board_id printed when the file is missing or by your downstream kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin [2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README [3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin [4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55 Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 2aac25171dec..4ba8e59a27d8 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -315,6 +315,14 @@ &usb_hsphy { status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l17>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; -- 2.40.0
