On 5.04.2023 08:11, Krzysztof Kozlowski wrote: > Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with > indices matching downstream DTS, to make any comparisons easier. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad > > Changes since v2: > 1. Use labels instead of comments (Konrad). > 2. Use interrupts instead of interupts-extended (Konrad) > > Changes since v1: > 1. Correct IO range length. > > The bindings and driver are here: > https://lore.kernel.org/linux-arm-msm/20230403132503.62090-1-krzysztof.kozlowski@xxxxxxxxxx/T/#t > > Cc: Patrick Lai <quic_plai@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/sm8550.dtsi | 109 +++++++++++++++++++++++++++ > 1 file changed, 109 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi > index dc6150e97d46..f9eaede39b5b 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi > @@ -2004,6 +2004,33 @@ lpass_wsa2macro: codec@6aa0000 { > #sound-dai-cells = <1>; > }; > > + swr3: soundwire-controller@6ab0000 { > + compatible = "qcom,soundwire-v2.0.0"; > + reg = <0 0x06ab0000 0 0x10000>; > + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&lpass_wsa2macro>; > + clock-names = "iface"; > + label = "WSA2"; > + > + qcom,din-ports = <4>; > + qcom,dout-ports = <9>; > + > + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; > + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; > + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; > + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; > + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; > + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + > + #address-cells = <2>; > + #size-cells = <0>; > + #sound-dai-cells = <1>; > + status = "disabled"; > + }; > + > lpass_rxmacro: codec@6ac0000 { > compatible = "qcom,sm8550-lpass-rx-macro"; > reg = <0 0x06ac0000 0 0x1000>; > @@ -2023,6 +2050,33 @@ lpass_rxmacro: codec@6ac0000 { > #sound-dai-cells = <1>; > }; > > + swr1: soundwire-controller@6ad0000 { > + compatible = "qcom,soundwire-v2.0.0"; > + reg = <0 0x06ad0000 0 0x10000>; > + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&lpass_rxmacro>; > + clock-names = "iface"; > + label = "RX"; > + > + qcom,din-ports = <0>; > + qcom,dout-ports = <10>; > + > + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; > + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; > + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; > + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; > + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; > + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; > + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; > + > + #address-cells = <2>; > + #size-cells = <0>; > + #sound-dai-cells = <1>; > + status = "disabled"; > + }; > + > lpass_txmacro: codec@6ae0000 { > compatible = "qcom,sm8550-lpass-tx-macro"; > reg = <0 0x06ae0000 0 0x1000>; > @@ -2061,6 +2115,61 @@ lpass_wsamacro: codec@6b00000 { > #sound-dai-cells = <1>; > }; > > + swr0: soundwire-controller@6b10000 { > + compatible = "qcom,soundwire-v2.0.0"; > + reg = <0 0x06b10000 0 0x10000>; > + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&lpass_wsamacro>; > + clock-names = "iface"; > + label = "WSA"; > + > + qcom,din-ports = <4>; > + qcom,dout-ports = <9>; > + > + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; > + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; > + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; > + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; > + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; > + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > + > + #address-cells = <2>; > + #size-cells = <0>; > + #sound-dai-cells = <1>; > + status = "disabled"; > + }; > + > + swr2: soundwire-controller@6d30000 { > + compatible = "qcom,soundwire-v2.0.0"; > + reg = <0 0x06d30000 0 0x10000>; > + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "core", "wakeup"; > + clocks = <&lpass_vamacro>; > + clock-names = "iface"; > + label = "TX"; > + > + qcom,din-ports = <4>; > + qcom,dout-ports = <0>; > + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; > + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; > + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; > + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; > + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; > + > + #address-cells = <2>; > + #size-cells = <0>; > + #sound-dai-cells = <1>; > + status = "disabled"; > + }; > + > lpass_vamacro: codec@6d44000 { > compatible = "qcom,sm8550-lpass-va-macro"; > reg = <0 0x06d44000 0 0x1000>;
