On Fri, Nov 21, 2014 at 06:17:58PM +0100, Robert Jarzmik wrote:
> Felipe Balbi <balbi@xxxxxx> writes:
>
> > On Sun, Nov 09, 2014 at 02:02:18PM +0100, Robert Jarzmik wrote:
> >> hsusb1_phy {
> >> @@ -26,8 +31,11 @@ Example:
> >> clock-names = "main_clk";
> >> vcc-supply = <&hsusb1_vcc_regulator>;
> >> reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> >> + vbus-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
> >> + vbus-regulator = <&vbus_regulator>;
> >
> > not sure why you need vbus-gpios here. You can pass the gpio to the
> > regulator as enable-gpio, right ?
>
> Euh no. From my understanding a regulator enable-gpio is an _output_ gpio
> enabling the regulator. This vbus-gpio is an _input_ gpio detecting the vbus
> assertion. Maybe a name like "vbus-detect-gpio" would be more accurante ?
aha, that clears it up, yeah. So the GPIO is detecting if we have VBUS
from the host side while the regulator supplies VBUS ?
--
balbi
Attachment:
signature.asc
Description: Digital signature
