> Gesendet: Montag, 03. April 2023 um 14:43 Uhr > Von: "AngeloGioacchino Del Regno" <angelogioacchino.delregno@xxxxxxxxxxxxx> > Il 03/04/23 12:58, Frank Wunderlich ha scritto: > > From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > > > > To store uncompressed bl2 more space is required than partition is > > actually defined. > > > > Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > > If this doesn't get changed anymore, I'm fine with it... but a question arises: > did you send patches to add your BPI-r3 board(s) to upstream u-boot? currently i use the rfb dts for r3 in uboot: arch/arm/dts/mt7986a-sd-rfb.dts this file in upstream uboot has no partitions defined https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/mt7986a-sd-rfb.dts#L144 but i added them there too and i wrote content by offsets to main device (not to partitions). https://github.com/frank-w/u-boot/blob/2023-04-bpi/arch/arm/dts/mt7986a-sd-rfb.dts#L154 so yes basicly it needs to be send there too, maybe as additional dts. regards Frank > > --- > > I used the definition i got from mtk used in their SDK uboot. > > > > Openwrt uses also the first reserved partition to give bl2 more > > space: > > > > https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts;h=f597b869abc80d1a73f44ebb85ad4da17376bb52;hb=HEAD#l22 > > > > so imho it should be same in mainline to not require complex bl2 > > compression. > > Regards, > Angelo > >
