We need to enable some drivers in order to use the following peripherals of Tarragon: * QCA7000/7005 Powerline chip * One-Wire Master DS2484 with external thermal sensors * external 4 pin PWM fan * ST IIS328DQ I2C accelerometer Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxxxxxxxx> --- arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 9475839e7fe1..2e2af31eeb4c 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -128,6 +128,7 @@ CONFIG_CS89x0_PLATFORM=y # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_QCA7000_SPI=m # CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMC91X=y CONFIG_SMC911X=y @@ -216,6 +217,9 @@ CONFIG_GPIO_PCF857X=y CONFIG_GPIO_BD71815=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y +CONFIG_W1=m +CONFIG_W1_MASTER_DS2482=m +CONFIG_W1_SLAVE_THERM=m CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y @@ -224,6 +228,7 @@ CONFIG_RN5T618_POWER=m CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y +CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_SY7636A=y CONFIG_THERMAL_STATISTICS=y CONFIG_THERMAL_WRITABLE_TRIPS=y @@ -409,6 +414,7 @@ CONFIG_CLK_IMX8MQ=y CONFIG_SOC_IMX8M=y CONFIG_EXTCON_USB_GPIO=y CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_MMA8452=y CONFIG_IMX7D_ADC=y CONFIG_RN5T618_ADC=y -- 2.17.1
