Add devicetree support for PCIe PHY used in SDX65 platform. This PHY is
used by the PCIe EP controller.
Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 192f9f9..084daf8 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -293,6 +293,37 @@
status = "disabled";
};
+ pcie_phy: phy@1c06000 {
+ compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
+ reg = <0x01c06000 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+ <&gcc GCC_PCIE_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_EN>,
+ <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+ <&gcc GCC_PCIE_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ resets = <&gcc GCC_PCIE_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ power-domains = <&gcc PCIE_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
--
2.7.4
