[PATCH v5 0/5] Add PCIe EP support for SDX65

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Changes in v5:
 - Addressed some minor comments from Konrad
 - Rebased on top of 6.3-rc5.

Changes in v4:
 - Addressed comment from Dmitry to move the gpios to the board file.

Changes in v3:
 - Removing the applied patch.
 - Addressing some of the compile time issues missed in v2.

Changes in v2:
 - Addressing comments from Konrad and Dmitry.
 - Rebased on top of 6.3-rc1.

This series adds the devicetree support for PCIe PHY and PCIe EP on SDX65.
The PCIe EP is enabled on SDX65 MTP board.

Thanks,
Rohit.

Rohit Agarwal (5):
  dt-bindings: PCI: qcom: Add SDX65 SoC
  ARM: dts: qcom: sdx65: Add support for PCIe PHY
  ARM: dts: qcom: sdx65: Add support for PCIe EP
  ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY
  ARM: dts: qcom: sdx65-mtp: Enable PCIe EP

 .../devicetree/bindings/pci/qcom,pcie-ep.yaml      |  2 +
 arch/arm/boot/dts/qcom-sdx65-mtp.dts               | 51 ++++++++++++-
 arch/arm/boot/dts/qcom-sdx65.dtsi                  | 87 ++++++++++++++++++++++
 3 files changed, 137 insertions(+), 3 deletions(-)

-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux