Re: [PATCH v6 08/12] arm64: dts: nuvoton: Add initial ma35d1 device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Jacky Huang (2023-03-28 20:43:23)
> On 2023/3/29 上午 11:25, Stephen Boyd wrote:
> > Quoting Jacky Huang (2023-03-28 20:13:11)
> >> I may not explain clearly enough. The lock/unlock register of system
> >> controller is more like
> >> a kind of write protection for specific registers, rather than
> >> preventing hetero-core CPU access.
> >> In many different IP of ma35d1 contain write protected registers.
> >> In fact, ma35d1 has a "hardware semaphore" IP, and we have implemented
> >> the driver in drivers/hwspinlock.
> >> Even the control register of "hardware semaphore" is also write protected.
> > What's the need to lock and unlock the registers? Is some other
> > processor also writing to the registers that we need to synchronize
> > against? Or is Linux the only entity reading and writing the registers?
> > I'm wondering if we should simply unlock the registers and never lock
> > them.

Can you answer this question?

> >
> >> So, should we implement a system controller driver to provide
> >> register_unlock() function?
> >> Is it OK to have such a driver in drivers/mfd?
> >> Or, just use syscon in device tree for those devices that have write
> >> protect registers.
> >>
> > The hwspinlock framework doesn't require there to be another entity
> > accessing some resource. It's there to implement hardware locks. I don't
> > see why it can't be used here.
> 
> The current usage of register lock/unlock protect is as the following code:
> 
> static void ma35d1_unlock_regs(struct ma35d1_clk_pll *pll)
> {
>      int ret;
> 
>      do {
>          regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x59);
>          regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x16);
>          regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x88);
>          regmap_read(pll->regmap, REG_SYS_RLKTZNS, &ret);
>      } while (ret == 0);
> }
> 
> static void ma35d1_lock_regs(struct ma35d1_clk_pll *pll)
> {
>      regmap_write(pll->regmap, REG_SYS_RLKTZNS, 0x0);
> }
> 
> And the following code is to unlock registers for write and then lock again.
> 
>      ma35d1_unlock_regs(pll);
>      writel_relaxed(reg_ctl[0], pll->ctl0_base);
>      writel_relaxed(reg_ctl[1], pll->ctl1_base);
>      writel_relaxed(reg_ctl[2], pll->ctl2_base);
>      ma35d1_lock_regs(pll);
> 
> The above code is from the clk-ma35d1-pll.c from this patchset.

Yeah I understand that you write some registers in the syscon to lock
the registers.

> 
> We just employ regmap mechansim for the access to REG_SYS_RLKTZNS register.
> Is this implementation OK for you?  Thank you.
> 

No. Why can't that be a hwspinlock? Or why can't it be unlocked all the
time and rely on software spinlocks in the kernel to prevent concurrent
access to the registers accessed by a driver, like a lock for the clk
registers and a lock for the reset registers, etc. Or if no two clks or
resets exist within one 32-bit word then no lock is necessary.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux