On Mon, 27 Mar 2023 22:16:27 +0200, Dario Binacchi wrote: > Add documentation of device tree bindings for the STM32 basic extended > CAN (bxcan) controller. > > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > --- > > Changes in v9: > - Replace master/slave terms with primary/secondary. > > Changes in v5: > - Add Rob Herring's Reviewed-by tag. > > Changes in v4: > - Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes > (compatible "st,stm32f4-bxcan") are no longer children of a parent > node with compatible "st,stm32f4-bxcan-core". > - Add the "st,gcan" property (global can memory) to can nodes which > references a "syscon" node containing the shared clock and memory > addresses. > > Changes in v3: > - Remove 'Dario Binacchi <dariobin@xxxxxxxxx>' SOB. > - Add description to the parent of the two child nodes. > - Move "patterProperties:" after "properties: in top level before "required". > - Add "clocks" to the "required:" list of the child nodes. > > Changes in v2: > - Change the file name into 'st,stm32-bxcan-core.yaml'. > - Rename compatibles: > - st,stm32-bxcan-core -> st,stm32f4-bxcan-core > - st,stm32-bxcan -> st,stm32f4-bxcan > - Rename master property to st,can-master. > - Remove the status property from the example. > - Put the node child properties as required. > > .../bindings/net/can/st,stm32-bxcan.yaml | 85 +++++++++++++++++++ > 1 file changed, 85 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml:27:11: [error] syntax error: mapping values are not allowed here (syntax) dtschema/dtc warnings/errors: make[1]: *** Deleting file 'Documentation/devicetree/bindings/net/can/st,stm32-bxcan.example.dts' Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml:27:11: mapping values are not allowed here make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/can/st,stm32-bxcan.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml:27:11: mapping values are not allowed here /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml: ignoring, error parsing file make: *** [Makefile:1512: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230327201630.3874028-3-dario.binacchi@xxxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
