Hi Krzysztof, On 26.03.2023 16:54, Krzysztof Kozlowski wrote: > On 26/03/2023 14:29, Aleksander Jan Bajkowski wrote: >> Document the legacy Lantiq device tree bindings. > This suggests you are documenting existing compatibles, but I do not see > them at all. Confusing. The added compatible strings can be found in: - arch/mips/lantiq/xway/sysctrl.c, - arch/mips/lantiq/falcon/prom.c, - arch/mips/lantiq/xway/prom.c. Upstream only has one dts for danube development board. More dts can be found in OpenWRT [1]. I have a bunch of these devices and intend to send dts files upstream. > >> Compatible strings for xRX100 (ar9) and newer SoCs > Please wrap commit message according to Linux coding style / submission > process (neither too early nor over the limit): > https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586 Will be fixed in v2. >> should be renamed and will be added later. > Subject: drop second/last, redundant "dt bindings". The "dt-bindings" > prefix is already stating that these are bindings. Will be fixed in v2. > >> Signed-off-by: Aleksander Jan Bajkowski <olek2@xxxxx> >> --- >> .../devicetree/bindings/mips/lantiq/soc.yaml | 38 +++++++++++++++++++ >> 1 file changed, 38 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mips/lantiq/soc.yaml >> >> diff --git a/Documentation/devicetree/bindings/mips/lantiq/soc.yaml b/Documentation/devicetree/bindings/mips/lantiq/soc.yaml >> new file mode 100644 >> index 000000000000..90e8148b111b >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mips/lantiq/soc.yaml >> @@ -0,0 +1,38 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mips/lantiq/soc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Lantiq SoC based Platform >> + >> +maintainers: >> + - Aleksander Jan Bajkowski <olek2@xxxxx> >> + >> +description: >> + Devices with a Lantiq CPU shall have the following properties. >> + >> +properties: >> + $nodename: >> + const: "/" >> + compatible: >> + oneOf: >> + - description: Boards with Lantiq Amazon-SE SoC >> + items: >> + - const: lantiq,ase > This does not look like proper board compatible. Boards have almost > always minimum two compatibles - one for SoC and one for board. With > commit msg this just adds to confusion... > The added dt-binding contains only the SoC part. The compatible strings for individual boards will be added later together with the dts files. Before sending the dts files I want to document current bindings and clear checkpach warnings about undocumented strings. > Best regards, > Krzysztof > 1. https://github.com/openwrt/openwrt/tree/master/target/linux/lantiq/files/arch/mips/boot/dts/lantiq Best Regards, Aleksander