Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/thermal/amlogic,thermal.yaml | 2 +-
Documentation/devicetree/bindings/thermal/imx-thermal.yaml | 4 ++--
Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index 999c6b365f1d..20f8f9b3b971 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -30,7 +30,7 @@ properties:
amlogic,ao-secure:
description: phandle to the ao-secure syscon
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ $ref: /schemas/types.yaml#/definitions/phandle
'#thermal-sensor-cells':
const: 0
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index b22c8b59d5c7..fe599e443eaf 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -40,11 +40,11 @@ properties:
- const: temp_grade
fsl,tempmon:
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ $ref: /schemas/types.yaml#/definitions/phandle
description: Phandle to anatop system controller node.
fsl,tempmon-data:
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ $ref: /schemas/types.yaml#/definitions/phandle
description: |
Deprecated property, phandle pointer to fuse controller that contains
TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
index f09e8723ca2b..145744027234 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -29,14 +29,14 @@ properties:
maxItems: 1
fsl,tmu-range:
- $ref: '/schemas/types.yaml#/definitions/uint32-array'
+ $ref: /schemas/types.yaml#/definitions/uint32-array
description: |
The values to be programmed into TTRnCR, as specified by the SoC
reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
maxItems: 4
fsl,tmu-calibration:
- $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
A list of cell pairs containing temperature calibration data, as
specified by the SoC reference manual. The first cell of each pair
--
2.39.2
