[PATCH v8 3/3] remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



AM62 and AM62A SoCs use single core R5F which is a new scenario
different than the one being used with CLUSTER_MODE_SINGLECPU which is
for utilizing a single core from a set of cores available in R5F cluster
present in the SoC.

To support this single core scenario map it with newly defined
CLUSTER_MODE_SINGLECORE and use it when compatible is set to
ti,am62-r5fss.

Also set PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE config for
CLUSTER_MODE_SINGLECORE too as it is required by R5 core when it is
being as general purpose core instead of device manager.

For IPC-only mode when config flag PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE
is set, skip overriding to CLUSTER_MODE_SINGLECPU when
CLUSTER_MODE_SINGLECORE is set as same flag is applicable for single
core configuration too.

Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
---
V2:
- Fix indentation and ordering issues as per review comments
V3:
- Change CLUSTER_MODE_NONE value to -1
V4:
- No change
V5:
- No change (fixing typo in email address)
V6:
   - Use CLUSTER_MODE_SINGLECORE for AM62x
   - Set PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE for single core.
V7:
   - Simplify and rebase on top of base commit "[PATCH v7] remoteproc: k3-r5: Simplify cluster
     mode setting"
V8:
   - Rebase on top of base commit "[PATCH v8] remoteproc: k3-r5: Simplify
     cluster mode setting"

Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
---
 drivers/remoteproc/ti_k3_r5_remoteproc.c | 59 +++++++++++++++++++-----
 1 file changed, 47 insertions(+), 12 deletions(-)

diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index fd035a83c816..23fe44d4d7a5 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -71,14 +71,16 @@ struct k3_r5_mem {
 /*
  * All cluster mode values are not applicable on all SoCs. The following
  * are the modes supported on various SoCs:
- *   Split mode      : AM65x, J721E, J7200 and AM64x SoCs
- *   LockStep mode   : AM65x, J721E and J7200 SoCs
- *   Single-CPU mode : AM64x SoCs only
+ *   Split mode       : AM65x, J721E, J7200 and AM64x SoCs
+ *   LockStep mode    : AM65x, J721E and J7200 SoCs
+ *   Single-CPU mode  : AM64x SoCs only
+ *   Single-Core mode : AM62x, AM62A SoCs
  */
 enum cluster_mode {
 	CLUSTER_MODE_SPLIT = 0,
 	CLUSTER_MODE_LOCKSTEP,
 	CLUSTER_MODE_SINGLECPU,
+	CLUSTER_MODE_SINGLECORE
 };
 
 /**
@@ -86,11 +88,13 @@ enum cluster_mode {
  * @tcm_is_double: flag to denote the larger unified TCMs in certain modes
  * @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC
  * @single_cpu_mode: flag to denote if SoC/IP supports Single-CPU mode
+ * @is_single_core: flag to denote if SoC/IP has only single core R5
  */
 struct k3_r5_soc_data {
 	bool tcm_is_double;
 	bool tcm_ecc_autoinit;
 	bool single_cpu_mode;
+	bool is_single_core;
 };
 
 /**
@@ -838,7 +842,8 @@ static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc)
 
 	core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem);
 	if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
-	    cluster->mode == CLUSTER_MODE_SINGLECPU) {
+	    cluster->mode == CLUSTER_MODE_SINGLECPU ||
+	    cluster->mode == CLUSTER_MODE_SINGLECORE) {
 		core = core0;
 	} else {
 		core = kproc->core;
@@ -877,7 +882,8 @@ static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc)
 		 * with the bit configured, so program it only on
 		 * permitted cores
 		 */
-		if (cluster->mode == CLUSTER_MODE_SINGLECPU) {
+		if (cluster->mode == CLUSTER_MODE_SINGLECPU ||
+		    cluster->mode == CLUSTER_MODE_SINGLECORE) {
 			set_cfg = PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE;
 		} else {
 			/*
@@ -1069,6 +1075,7 @@ static void k3_r5_adjust_tcm_sizes(struct k3_r5_rproc *kproc)
 
 	if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
 	    cluster->mode == CLUSTER_MODE_SINGLECPU ||
+	    cluster->mode == CLUSTER_MODE_SINGLECORE ||
 	    !cluster->soc_data->tcm_is_double)
 		return;
 
@@ -1145,7 +1152,7 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
 	single_cpu = cfg & PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE ? 1 : 0;
 	lockstep_en = cfg & PROC_BOOT_CFG_FLAG_R5_LOCKSTEP ? 1 : 0;
 
-	if (single_cpu)
+	if (single_cpu && mode != CLUSTER_MODE_SINGLECORE)
 		mode = CLUSTER_MODE_SINGLECPU;
 	if (lockstep_en)
 		mode = CLUSTER_MODE_LOCKSTEP;
@@ -1265,9 +1272,12 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
 			goto err_add;
 		}
 
-		/* create only one rproc in lockstep mode or single-cpu mode */
+		/* create only one rproc in lockstep, single-cpu or
+		 * single core mode
+		 */
 		if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
-		    cluster->mode == CLUSTER_MODE_SINGLECPU)
+		    cluster->mode == CLUSTER_MODE_SINGLECPU ||
+		    cluster->mode == CLUSTER_MODE_SINGLECORE)
 			break;
 	}
 
@@ -1710,19 +1720,33 @@ static int k3_r5_probe(struct platform_device *pdev)
 		/*
 		 * default to most common efuse configurations - Split-mode on AM64x
 		 * and LockStep-mode on all others
+		 * default to most common efuse configurations -
+		 * Split-mode on AM64x
+		 * Single core on AM62x
+		 * LockStep-mode on all others
 		 */
-		cluster->mode = data->single_cpu_mode ?
+		if (!data->is_single_core)
+			cluster->mode = data->single_cpu_mode ?
 					CLUSTER_MODE_SPLIT : CLUSTER_MODE_LOCKSTEP;
+		else
+			cluster->mode = CLUSTER_MODE_SINGLECORE;
 	}
 
-	if (cluster->mode == CLUSTER_MODE_SINGLECPU && !data->single_cpu_mode) {
+	if  ((cluster->mode == CLUSTER_MODE_SINGLECPU && !data->single_cpu_mode) ||
+	     (cluster->mode == CLUSTER_MODE_SINGLECORE && !data->is_single_core)) {
 		dev_err(dev, "Cluster mode = %d is not supported on this SoC\n", cluster->mode);
 		return -EINVAL;
 	}
 
 	num_cores = of_get_available_child_count(np);
-	if (num_cores != 2) {
-		dev_err(dev, "MCU cluster requires both R5F cores to be enabled, num_cores = %d\n",
+	if (num_cores != 2 && !data->is_single_core) {
+		dev_err(dev, "MCU cluster requires both R5F cores to be enabled but num_cores is set to = %d\n",
+			num_cores);
+		return -ENODEV;
+	}
+
+	if (num_cores != 1 && data->is_single_core) {
+		dev_err(dev, "SoC supports only single core R5 but num_cores is set to %d\n",
 			num_cores);
 		return -ENODEV;
 	}
@@ -1764,18 +1788,28 @@ static const struct k3_r5_soc_data am65_j721e_soc_data = {
 	.tcm_is_double = false,
 	.tcm_ecc_autoinit = false,
 	.single_cpu_mode = false,
+	.is_single_core = false,
 };
 
 static const struct k3_r5_soc_data j7200_j721s2_soc_data = {
 	.tcm_is_double = true,
 	.tcm_ecc_autoinit = true,
 	.single_cpu_mode = false,
+	.is_single_core = false,
 };
 
 static const struct k3_r5_soc_data am64_soc_data = {
 	.tcm_is_double = true,
 	.tcm_ecc_autoinit = true,
 	.single_cpu_mode = true,
+	.is_single_core = false,
+};
+
+static const struct k3_r5_soc_data am62_soc_data = {
+	.tcm_is_double = false,
+	.tcm_ecc_autoinit = true,
+	.single_cpu_mode = false,
+	.is_single_core = true,
 };
 
 static const struct of_device_id k3_r5_of_match[] = {
@@ -1783,6 +1817,7 @@ static const struct of_device_id k3_r5_of_match[] = {
 	{ .compatible = "ti,j721e-r5fss", .data = &am65_j721e_soc_data, },
 	{ .compatible = "ti,j7200-r5fss", .data = &j7200_j721s2_soc_data, },
 	{ .compatible = "ti,am64-r5fss",  .data = &am64_soc_data, },
+	{ .compatible = "ti,am62-r5fss",  .data = &am62_soc_data, },
 	{ .compatible = "ti,j721s2-r5fss",  .data = &j7200_j721s2_soc_data, },
 	{ /* sentinel */ },
 };
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux