The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-rockpro64.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
There is only one endpoint, so use simpler form without "reg".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 78157521e944..bca2b50e0a93 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -647,16 +647,10 @@ mipi_panel: panel@0 {
avdd-supply = <&avdd>;
backlight = <&backlight>;
dvdd-supply = <&vcc3v3_s0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
-
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
};
};
};
--
2.34.1
