The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-pinebook-pro.dtb: edp-panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 54bb0398128f..ddd45de97950 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -50,19 +50,9 @@ edp_panel: edp-panel {
pinctrl-0 = <&panel_en_pin>;
power-supply = <&vcc3v3_panel>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel_in_edp: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&edp_out_panel>;
- };
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
};
};
};
--
2.34.1
