Re: [PATCH 1/2] ARM: dts: qcom: sdx65: add IPA information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/26/23 11:04 AM, Krzysztof Kozlowski wrote:
On 26/03/2023 18:01, Alex Elder wrote:
On 3/25/23 6:14 AM, Krzysztof Kozlowski wrote:
On 24/03/2023 21:15, Alex Elder wrote:
Add IPA-related nodes and definitions to "sdx65.dtsi".  The SMP2P
nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.

Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust
Zone on this platform.

Tested-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
---
   arch/arm/boot/dts/qcom-sdx65-mtp.dts |  5 ++++
   arch/arm/boot/dts/qcom-sdx65.dtsi    | 38 ++++++++++++++++++++++++++++
   2 files changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index ed98c83c141fc..72e25de0db5fc 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -245,6 +245,11 @@ &blsp1_uart3 {
   	status = "okay";
   };
+&ipa {
+	qcom,gsi-loader = "skip";
+	status = "okay";
+};
+
   &qpic_bam {
   	status = "okay";
   };
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 192f9f94bc8b4..360d6dc144811 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -11,6 +11,7 @@
   #include <dt-bindings/interrupt-controller/arm-gic.h>
   #include <dt-bindings/power/qcom-rpmpd.h>
   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/interconnect/qcom,sdx65.h>
/ {
   	#address-cells = <1>;
@@ -299,6 +300,43 @@ tcsr_mutex: hwlock@1f40000 {
   			#hwlock-cells = <1>;
   		};
+ ipa: ipa@3e04000 {
+			compatible = "qcom,sdx65-ipa";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+			reg = <0x3f40000 0x10000>,
+			      <0x3f50000 0x5000>,
+			      <0x3e04000 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					   "gsi",
+					   "ipa-clock-query",
+					   "ipa-setup-ready";

These look misaligned.

I believe this is the alignment convention used by all IPA nodes
in DTS files.  It's possible I'm not seeing something you are,
but...  what alignment should be used?  And if I change this,
should I change all others?

If this is aligned, then fine. The diff points it is not, but the diff
might be a bit tricky sometimes.

Alignment is till " in previous line. For example sdm845 looks fine.

OK thank you.  I will send v2 of this series after I hear back
from Konrad, adding your reviewed-by, and will double-check
the alignment as well.

					-Alex



Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux