El jue, 23 mar 2023 a las 20:58, Paul Geurts (<paul.geurts@xxxxxxxxxxxxxxxxxxxxxxxxx>) escribió: > > > -----Original Message----- > > From: Álvaro Fernández Rojas <noltari@xxxxxxxxx> > > Sent: donderdag 23 maart 2023 13:18 > > To: Paul Geurts <paul.geurts@xxxxxxxxxxxxxxxxxxxxxxxxx>; > > f.fainelli@xxxxxxxxx; jonas.gorski@xxxxxxxxx; andrew@xxxxxxx; > > olteanv@xxxxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; > > kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx; robh+dt@xxxxxxxxxx; > > krzysztof.kozlowski+dt@xxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; > > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > > Cc: Álvaro Fernández Rojas <noltari@xxxxxxxxx> > > Subject: [PATCH 0/2] net: dsa: b53: mdio: add support for BCM53134 > > > > This is based on the initial work from Paul Geurts that was sent to the > > incorrect linux development lists and recipients. > > I've modified it by removing BCM53134_DEVICE_ID from is531x5() and > > therefore adding is53134() where needed. > > I also added a separate RGMII handling block for is53134() since according to > > Paul, BCM53134 doesn't support RGMII_CTRL_TIMING_SEL as opposed to > > is531x5(). > > > > Paul Geurts (1): > > net: dsa: b53: mdio: add support for BCM53134 > > > > Álvaro Fernández Rojas (1): > > dt-bindings: net: dsa: b53: add BCM53134 support > > > > .../devicetree/bindings/net/dsa/brcm,b53.yaml | 1 + > > drivers/net/dsa/b53/b53_common.c | 53 ++++++++++++++++++- > > drivers/net/dsa/b53/b53_mdio.c | 5 +- > > drivers/net/dsa/b53/b53_priv.h | 9 +++- > > 4 files changed, 65 insertions(+), 3 deletions(-) > > > > -- > > 2.30.2 > > Thank you for resending my patches! I didn't get to it yet. Any particular reason you didn't include the optional GPIO patch I had in my set? I'm using it for a Sercomm H500-s which doesn't seem to need it. However, I've just realized that it's documented here as GPIO 18: https://openwrt.org/toh/sercomm/h500-s#other Anyway, I think that the GPIO patch can be added later... > --- > Paul -- Álvaro
