RE: [PATCH 0/2] net: dsa: b53: mdio: add support for BCM53134

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> Sent: donderdag 23 maart 2023 13:18
> To: Paul Geurts <paul.geurts@xxxxxxxxxxxxxxxxxxxxxxxxx>;
> f.fainelli@xxxxxxxxx; jonas.gorski@xxxxxxxxx; andrew@xxxxxxx;
> olteanv@xxxxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx;
> kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> krzysztof.kozlowski+dt@xxxxxxxxxx; netdev@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> Subject: [PATCH 0/2] net: dsa: b53: mdio: add support for BCM53134
> 
> This is based on the initial work from Paul Geurts that was sent to the
> incorrect linux development lists and recipients.
> I've modified it by removing BCM53134_DEVICE_ID from is531x5() and
> therefore adding is53134() where needed.
> I also added a separate RGMII handling block for is53134() since according to
> Paul, BCM53134 doesn't support RGMII_CTRL_TIMING_SEL as opposed to
> is531x5().
> 
> Paul Geurts (1):
>   net: dsa: b53: mdio: add support for BCM53134
> 
> Álvaro Fernández Rojas (1):
>   dt-bindings: net: dsa: b53: add BCM53134 support
> 
>  .../devicetree/bindings/net/dsa/brcm,b53.yaml |  1 +
>  drivers/net/dsa/b53/b53_common.c              | 53 ++++++++++++++++++-
>  drivers/net/dsa/b53/b53_mdio.c                |  5 +-
>  drivers/net/dsa/b53/b53_priv.h                |  9 +++-
>  4 files changed, 65 insertions(+), 3 deletions(-)
> 
> --
> 2.30.2

Thank you for resending my patches! I didn't get to it yet. Any particular reason you didn't include the optional GPIO patch I had in my set?
---
Paul




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux