The main goal of this series is to do a better job of controling the pins related to the "Quad SPI" IP block on Qualcomm Chromebooks. This is essentially 'v2' of my previous attempt in the patch ("arm64: dts: qcom: sc7180: Fix trogdor qspi pull direction") [1] but since it's spiraled out a bit and there are no patches that are exactly the same I've reset to v1. The early patches in this series are just no-op cleanup patches that can be applied. They're not terribly critical but since they are "Fixes" I've listed them first. The next patch in the series is a very simple and (hopefully) non-controversial SPI patch. It can be applied independently if anything else. Next, we have a bunch of pinctrl patches (including the device tree bindings related to them). I dunno what folks are going to think about these. If everyone hates them, we can drop them and just change the later patches in the series to use "input-enable" instead of "output-disable". It feels ugly to me, but it maybe less upheval. Next I removed the now-deprecated "input-enable" property from all Chromebooks. None of them were necessary. Finally, I did what I really wanted to do in the first place: attempt to cleanup the pinctrl states of the Quad SPI. These patches have a hard requirement on the pinctrl change. [1] https://lore.kernel.org/r/20230213165743.1.I6f03f86546e6ce9abb1d24fd9ece663c3a5b950c@changeid Douglas Anderson (14): arm64: dts: sc7180: Rename qspi data12 as data23 arm64: dts: sc7280: Rename qspi data12 as data23 arm64: dts: sdm845: Rename qspi data12 as data23 arm64: dts: qcom: sc7180: Annotate l13a on trogdor to always-on spi: spi-qcom-qspi: Support pinctrl sleep states dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable dt-bindings: pinctrl: qcom: Add output-enable pinctrl: qcom: Support OUTPUT_ENABLE; deprecate INPUT_ENABLE arm64: dts: qcom: sc7180: Remove superfluous "input-enable"s from trogdor arm64: dts: qcom: sc7280: Remove superfluous "input-enable"s from idp-ec-h1 arm64: dts: qcom: sdm845: Remove superfluous "input-enable"s from cheza arm64: dts: qcom: sc7180: Fix trogdor qspi pin config arm64: dts: qcom: sc7280: Fix qspi pin config arm64: dts: qcom: sdm845: Fix cheza qspi pin config .../bindings/pinctrl/qcom,tlmm-common.yaml | 4 +- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 9 ++-- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 41 +++++++++++++------ arch/arm64/boot/dts/qcom/sc7180.dtsi | 11 +++-- .../boot/dts/qcom/sc7280-chrome-common.dtsi | 25 ++++++++++- .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++--- .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 2 - arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 13 +++--- arch/arm64/boot/dts/qcom/sc7280.dtsi | 11 +++-- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 37 ++++++++++++----- arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++-- drivers/pinctrl/qcom/pinctrl-msm.c | 36 +++++++++++++--- drivers/spi/spi-qcom-qspi.c | 5 +++ 13 files changed, 165 insertions(+), 54 deletions(-) -- 2.40.0.348.gf938b09366-goog