Re: [PATCH v3 4/6] dt-bindings: sound: Add support for the Lantiq PEF2256 codec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/03/2023 14:46, Herve Codina wrote:
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
> 
> The codec support allows to use some of the PCM system highway
> time-slots as audio channels to transport audio data over the E1/T1/J1
> lines.
> 
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> ---
>  .../bindings/sound/lantiq,pef2256-codec.yaml  | 54 +++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml b/Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml
> new file mode 100644
> index 000000000000..da35b70cda99
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/lantiq,pef2256-codec.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/lantiq,pef2256-codec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lantiq PEF2256 codec
> +
> +maintainers:
> +  - Herve Codina <herve.codina@xxxxxxxxxxx>
> +
> +description: |
> +  Codec support for PEF2256.
> +
> +  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
> +  line interface component designed to fulfill all required interfacing between
> +  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
> +
> +  The codec support allows to use some of the PCM system highway time-slots as
> +  audio channels to transport audio data over the E1/T1/J1 lines.
> +
> +  The time-slots used by the codec must be set and so, the properties
> +  'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
> +  'dai-tdm-slot-rx-mask' must be present in the ALSA sound card node for
> +  sub-nodes that involve the codec. The codec uses 8bit time-slots.
> +  'dai-tdm-tdm-slot-with' must be set to 8.
> +  The tx and rx masks define the PEF2256 time-slots assigned to the codec.
> +
> +  The PEF2256 codec node should be a child of a PEF2256 node.
> +  Refer to the bindings described in
> +  Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: lantiq,pef2256-codec
> +
> +  '#sound-dai-cells':
> +    const: 0

You do not have here any resources, so the entire binding can be dropped
and merged into the parent.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux