RE: [EXT] Re: [PATCH v3 1/3] dt-bindings: usb: cdns-imx8qm: add imx8qm cdns3 glue bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Sent: Wednesday, March 22, 2023 4:38 PM
> To: Frank Li <frank.li@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx; festevam@xxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; linux-
> kernel@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> shawnguo@xxxxxxxxxx
> Subject: Re: [EXT] Re: [PATCH v3 1/3] dt-bindings: usb: cdns-imx8qm: add
> imx8qm cdns3 glue bindings
> 
> Caution: EXT Email
> 
> On 22/03/2023 22:36, Frank Li wrote:
> >
> >
> >> -----Original Message-----
> >> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> >> Sent: Wednesday, March 22, 2023 4:32 PM
> >> To: Frank Li <frank.li@xxxxxxx>
> >> Cc: devicetree@xxxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> imx@xxxxxxxxxxxxxxx;
> >> kernel@xxxxxxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; linux-arm-
> >> kernel@xxxxxxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; linux-
> >> kernel@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> >> shawnguo@xxxxxxxxxx
> >> Subject: Re: [EXT] Re: [PATCH v3 1/3] dt-bindings: usb: cdns-imx8qm: add
> >> imx8qm cdns3 glue bindings
> >>
> >> Caution: EXT Email
> >>
> >> On 22/03/2023 15:34, Frank Li wrote:
> >>>
> >>>
> >>>> -----Original Message-----
> >>>> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> >>>> Sent: Wednesday, March 22, 2023 2:32 AM
> >>>> To: Frank Li <frank.li@nxp.
> >>>>> +      - const: usb3_aclk
> >>>>> +      - const: usb3_ipg_clk
> >>>>> +      - const: usb3_core_pclk
> >>>>> +
> >>>>> +  assigned-clocks:
> >>>>> +    items:
> >>>>> +      - description: Phandle and clock specifoer of
> >>>> IMX_SC_PM_CLK_MST_BUS.
> >>>>
> >>>> Drop useless pieces so "Phandle and clock specifoer of " and name the
> >>>> hardware, not the syntax.
> >>>>
> >>>>> +
> >>>>> +  assigned-clock-rates:
> >>>>> +    items:
> >>>>> +      - description: Should be in Range 100 - 600 Mhz.
> >>>>
> >>>> That's better but I still do not understand why do you need it in the
> >>>> bindings. You never actually answered this question.
> >>>
> >>> I am not sure 100% sure the reason.
> >>> I think difference system target's  axi bus frequency is difference,
> >>> And just one time work, needn't software to manage it.
> >>> Following other driver's code style may be another reason.
> >>
> >> That's the reason of heaving it in DTS. But I am asking about bindings.
> >> You do understand you define here interface?
> >
> > I defined here is descript AXI frequency for usb controller. Supposed
> difference
> > Platform will have difference working frequency.
> 
> I don't understand how does this answer my concerns of having it in DT
> bindings. If you do not add it, you "will have difference working
> frequency", so what's the point?

For example: imx8qxp, it need set to 250Mhz,  i.MX8QM need set to 200Mhz.
Maybe future chip can set to 400Mhz.

> 
> Best regards,
> Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux