Re: [PATCH 0/4] Add LVTS support for mt8192

[Balsam CHIHI <bchihi@xxxxxxxxxxxx>]

Hi Chen-Yu,

I suspect the bug comes from incorrect calibration data offsets for AP
Domain because you confirm that MCU Domain probe runs without issues.
Is it possible to test something for us to confirm this theory (i
don't have an mt8192 board on hand now), when you have the time of
course?
We would like to test AP Domain's calibration data offsets with a
working one, for example :

 static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
                {
-               .cal_offset = { 0x25, 0x28 },
+               .cal_offset = { 0x04, 0x04 },
                .lvts_sensor = {
                        { .dt_id = MT8192_AP_VPU0 },
                        { .dt_id = MT8192_AP_VPU1 }
@@ -1336,7 +1336,7 @@ static const struct lvts_ctrl_data
mt8192_lvts_ap_data_ctrl[] = {
                .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
        },
        {
-               .cal_offset = { 0x2e, 0x31 },
+               .cal_offset = { 0x04, 0x04 },
                .lvts_sensor = {
                        { .dt_id = MT8192_AP_GPU0 },
                        { .dt_id = MT8192_AP_GPU1 }
@@ -1346,7 +1346,7 @@ static const struct lvts_ctrl_data
mt8192_lvts_ap_data_ctrl[] = {
                .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
        },
        {
-               .cal_offset = { 0x37, 0x3a },
+               .cal_offset = { 0x04, 0x04 },
                .lvts_sensor = {
                        { .dt_id = MT8192_AP_INFRA },
                        { .dt_id = MT8192_AP_CAM },
@@ -1356,7 +1356,7 @@ static const struct lvts_ctrl_data
mt8192_lvts_ap_data_ctrl[] = {
                .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
        },
        {
-               .cal_offset = { 0x40, 0x43, 0x46 },
+               .cal_offset = { 0x04, 0x04, 0x04 },
                .lvts_sensor = {
                        { .dt_id = MT8192_AP_MD0 },
                        { .dt_id = MT8192_AP_MD1 },

This example is tested and works for mt8195,
(all sensors use the same calibration data offset for testing purposes).

Thank you in advance for your help.

Best regards,
Balsam