Add ADI MAX77658 power supply devicetree document. Signed-off-by: Nurettin Bolucu <Nurettin.Bolucu@xxxxxxxxxx> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx> --- .../power/supply/adi,max77658-battery.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/adi,max77658-battery.yaml diff --git a/Documentation/devicetree/bindings/power/supply/adi,max77658-battery.yaml b/Documentation/devicetree/bindings/power/supply/adi,max77658-battery.yaml new file mode 100644 index 000000000000..0b696f7c4d1b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/adi,max77658-battery.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/adi,max77658-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery for MAX77658 PMIC from ADI. + +maintainers: + - Nurettin Bolucu <Nurettin.Bolucu@xxxxxxxxxx> + - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx> + +description: | + This module is part of the MAX77658 MFD device. For more details + see Documentation/devicetree/bindings/mfd/adi,max77658.yaml. + + The fuel gauge is represented as a sub-node of the PMIC node on the device tree. + +properties: + compatible: + const: + adi,max77658-battery + + reg: + maxItems: 1 + + adi,valrt-min-microvolt: + description: Minimum voltage value that triggers the alarm. + + adi,valrt-max-microvolt: + description: Maximum voltage value that triggers the alarm. + + adi,salrt-min-percent: + description: Minimum percentage of battery that triggers the alarm. + + adi,salrt-max-percent: + description: Maximum percentage of battery that triggers the alarm. + + adi,ialrt-min-microamp: + description: Minimum current value that triggers the alarm. + + adi,ialrt-max-microamp: + description: Maximum current value that triggers the alarm. + + monitored-battery: + description: > + phandle to a "simple-battery" compatible node. + + This property must be a phandle to a node using the format described + in battery.yaml, with the following properties being required: + - alert-celsius + +required: + - compatible + +additionalProperties: false + +... -- 2.25.1
