The driver previously prevented probing devices on more than one bus due to locking constraints with the special page addresses. This constraint can be removed by allocating a reference-counted bus structure containing the lock, rather than using global variables. In addition, add devicetree bindings for the EE1004 driver for the AT30TSE device and add the devices to the Bonnell BMC system. Changes since v1: - Add the devicetree changes Eddie James (4): eeprom: ee1004: Enable devices on multiple busses doc: Add Atmel AT30TSE serial eeprom eeprom: ee1004: Add devicetree binding ARM: dts: aspeed: bonnell: Add DIMM SPD .../devicetree/bindings/trivial-devices.yaml | 2 + arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts | 20 ++ drivers/misc/eeprom/ee1004.c | 182 +++++++++++------- 3 files changed, 135 insertions(+), 69 deletions(-) -- 2.31.1
