Qualcomm's proprietary Android boot-loaders capture boot time stats, like the time when the bootloader started execution and at what point the bootloader handed over control to the kernel etc. in the IMEM region. This information is captured in a specific format by this driver by mapping a structure to the IMEM memory region and then accessing the members of the structure to print the information. This information is useful in verifying if existing boot KPIs have regressed or not. A sample log in SM8450(waipio) device is as follows:- KPI: Pre ABL Time = 3s KPI: ABL Time = 14s KPI: Kernel MPM timestamp = 890206 The Module Power Manager(MPM) sleep counter starts ticking at the PBL stage and the timestamp generated by the sleep counter is logged by the Qualcomm proprietary bootloader(ABL) at two points-> First when it starts execution which is logged here as "Pre ABL Time" and the second when it is about to load the kernel logged as "ABL Time". Both these values are read up by the driver from IMEM region and printed as above. The current sleep counter timestamp is also logged by the driver. Souradeep Chowdhury (4): dt-bindings: sram: qcom,imem: Add Boot Stat region within IMEM dt-bindings: soc: qcom,mpm-sleep-counter: Add the dtschema soc: qcom: boot_stat: Add Driver Support for Boot Stats MAINTAINERS: Add the entry for boot_stats driver support .../bindings/soc/qcom/qcom,mpm-sleep-counter.yaml | 40 ++++++++ .../devicetree/bindings/sram/qcom,imem.yaml | 20 ++++ MAINTAINERS | 7 ++ drivers/soc/qcom/Kconfig | 7 ++ drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/boot_stats.c | 108 +++++++++++++++++++++ 6 files changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,mpm-sleep-counter.yaml create mode 100644 drivers/soc/qcom/boot_stats.c -- 2.7.4
