Hi Alexandre, Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx> writes: > [1. text/plain] > Hi Steffen > > On 3/20/23 14:27, Steffen Trumtrar wrote: >> The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to 1 GB >> eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. >> Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx> >> --- >> Notes: >> checkpatch warns about un-documented binding >> According to checkpatch the binding for "winbond,w25q128" >> used in this dtsi is un-documented. >> However, 'jedec,spi-nor.yaml' defines the pattern >> (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$" >> so, this should be good!? > > We recently added some yaml fixes and we continue to send others (i.e., GPU yaml > error fix is under review) so please don't add new ones. Some of follownig > errors are directly linked to your board so please fix them. > sorry about that, seems like I wasn't using dt_binding_check correctly :( However, how did you generate these? > arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: > /soc/i2c@40012000/touch@44: failed to match any schema with compatible: > ['st,stmpe811'] > arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: > /soc/i2c@40012000/touch@44/touchscreen: failed to match any schema with > compatible: ['st,stmpe-ts'] > arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: /soc/i2c@40012000/leds@62: > failed to match any schema with compatible: ['nxp,pca9533'] The bindings are there and if I explicitly run dt_bindings_check with e.g. Documentation/devicetree/bindings/leds there is no warning/error. I will fixup the rest. Best regards, Steffen -- Pengutronix e.K. | Dipl.-Inform. Steffen Trumtrar | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |