[PATCH 3/3] iio: accel: Add support for Kionix/ROHM KX132 accelerometer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for the basic accelerometer features such as getting the
acceleration data via IIO. (raw reads, triggered buffer [data-ready] or
using the WMI IRQ).

Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf
Signed-off-by: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
---
 drivers/iio/accel/kionix-kx022a-i2c.c |   2 +
 drivers/iio/accel/kionix-kx022a-spi.c |   2 +
 drivers/iio/accel/kionix-kx022a.c     | 126 ++++++++++++++++++++++++++
 drivers/iio/accel/kionix-kx022a.h     |  53 +++++++++++
 4 files changed, 183 insertions(+)

diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c
index 21c4c0ae1a68..f9b2383c43f1 100644
--- a/drivers/iio/accel/kionix-kx022a-i2c.c
+++ b/drivers/iio/accel/kionix-kx022a-i2c.c
@@ -38,12 +38,14 @@ static int kx022a_i2c_probe(struct i2c_client *i2c)
 
 static const struct i2c_device_id kx022a_i2c_id[] = {
 	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx_chip_info[KX022A] },
+	{ .name = "kx132",  .driver_data = (kernel_ulong_t)&kx_chip_info[KX132] },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id);
 
 static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", .data = &kx_chip_info[KX022A] },
+	{ .compatible = "kionix,kx132",  .data = &kx_chip_info[KX132] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c
index ec076af0f261..86a10d6d33ff 100644
--- a/drivers/iio/accel/kionix-kx022a-spi.c
+++ b/drivers/iio/accel/kionix-kx022a-spi.c
@@ -38,12 +38,14 @@ static int kx022a_spi_probe(struct spi_device *spi)
 
 static const struct spi_device_id kx022a_spi_id[] = {
 	{ .name = "kx022a", .driver_data = (kernel_ulong_t)&kx_chip_info[KX022A] },
+	{ .name = "kx132",  .driver_data = (kernel_ulong_t)&kx_chip_info[KX132] },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, kx022a_spi_id);
 
 static const struct of_device_id kx022a_of_match[] = {
 	{ .compatible = "kionix,kx022a", .data = &kx_chip_info[KX022A] },
+	{ .compatible = "kionix,kx132",  .data = &kx_chip_info[KX132] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, kx022a_of_match);
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 27e8642aa8f5..3cacec99f792 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -128,6 +128,101 @@ static const struct regmap_config kx022a_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+/* Regmap configs kx132 */
+static const struct regmap_range kx132_volatile_ranges[] = {
+	{
+		.range_min = KX132_REG_XADP_L,
+		.range_max = KX132_REG_COTR,
+	}, {
+		.range_min = KX132_REG_TSCP,
+		.range_max = KX132_REG_INT_REL,
+	}, {
+		/* The reset bit will be cleared by sensor */
+		.range_min = KX132_REG_CNTL2,
+		.range_max = KX132_REG_CNTL2,
+	}, {
+		.range_min = KX132_REG_BUF_STATUS_1,
+		.range_max = KX132_REG_BUF_READ,
+	},
+};
+
+static const struct regmap_access_table kx132_volatile_regs = {
+	.yes_ranges = &kx132_volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(kx132_volatile_ranges),
+};
+
+static const struct regmap_range kx132_precious_ranges[] = {
+	{
+		.range_min = KX132_REG_INT_REL,
+		.range_max = KX132_REG_INT_REL,
+	},
+};
+
+static const struct regmap_access_table kx132_precious_regs = {
+	.yes_ranges = &kx132_precious_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(kx132_precious_ranges),
+};
+
+static const struct regmap_range kx132_read_only_ranges[] = {
+	{
+		.range_min = KX132_REG_XADP_L,
+		.range_max = KX132_REG_INT_REL,
+	}, {
+		.range_min = KX132_REG_BUF_STATUS_1,
+		.range_max = KX132_REG_BUF_STATUS_2,
+	}, {
+		.range_min = KX132_REG_BUF_READ,
+		.range_max = KX132_REG_BUF_READ,
+	},
+};
+
+static const struct regmap_access_table kx132_ro_regs = {
+	.no_ranges = &kx132_read_only_ranges[0],
+	.n_no_ranges = ARRAY_SIZE(kx132_read_only_ranges),
+};
+
+static const struct regmap_range kx132_write_only_ranges[] = {
+	{
+		.range_min = KX132_REG_MAN_WAKE,
+		.range_max = KX132_REG_MAN_WAKE,
+	}, {
+		.range_min = KX132_REG_SELF_TEST,
+		.range_max = KX132_REG_SELF_TEST,
+	}, {
+		.range_min = KX132_REG_BUF_CLEAR,
+		.range_max = KX132_REG_BUF_CLEAR,
+	},
+};
+
+static const struct regmap_access_table kx132_wo_regs = {
+	.no_ranges = &kx132_write_only_ranges[0],
+	.n_no_ranges = ARRAY_SIZE(kx132_write_only_ranges),
+};
+
+static const struct regmap_range kx132_noinc_read_ranges[] = {
+	{
+		.range_min = KX132_REG_BUF_READ,
+		.range_max = KX132_REG_BUF_READ,
+	},
+};
+
+static const struct regmap_access_table kx132_nir_regs = {
+	.yes_ranges = &kx132_noinc_read_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(kx132_noinc_read_ranges),
+};
+
+static const struct regmap_config kx132_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &kx132_volatile_regs,
+	.rd_table = &kx132_wo_regs,
+	.wr_table = &kx132_ro_regs,
+	.rd_noinc_table = &kx132_nir_regs,
+	.precious_table = &kx132_precious_regs,
+	.max_register = KX132_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static const struct iio_mount_matrix *
 kx022a_get_mount_matrix(const struct iio_dev *idev,
 			const struct iio_chan_spec *chan)
@@ -175,6 +270,13 @@ static const struct iio_chan_spec kx022a_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec kx132_channels[] = {
+	KX022A_ACCEL_CHAN(X, 0, KX132),
+	KX022A_ACCEL_CHAN(Y, 1, KX132),
+	KX022A_ACCEL_CHAN(Z, 2, KX132),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 /*
  * The sensor HW can support ODR up to 1600 Hz, which is beyond what most of the
  * Linux CPUs can handle without dropping samples. Also, the low power mode is
@@ -249,6 +351,30 @@ const struct kx022a_chip_info kx_chip_info[] = {
 		.inc6		  = KX022A_REG_INC6,
 		.xout_l		  = KX022A_REG_XOUT_L,
 	},
+	[KX132] = {
+		.name		  = "kx132",
+		.type		  = KX132,
+		.regmap_config	  = &kx132_regmap_config,
+		.channels	  = kx132_channels,
+		.num_channels	  = ARRAY_SIZE(kx132_channels),
+		.fifo_length	  = KX132_FIFO_LENGTH,
+		.who		  = KX132_REG_WHO,
+		.id		  = KX132_ID,
+		.cntl		  = KX132_REG_CNTL,
+		.cntl2		  = KX132_REG_CNTL2,
+		.odcntl		  = KX132_REG_ODCNTL,
+		.buf_cntl1	  = KX132_REG_BUF_CNTL1,
+		.buf_cntl2	  = KX132_REG_BUF_CNTL2,
+		.buf_clear	  = KX132_REG_BUF_CLEAR,
+		.buf_status1	  = KX132_REG_BUF_STATUS_1,
+		.buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL,
+		.buf_read	  = KX132_REG_BUF_READ,
+		.inc1		  = KX132_REG_INC1,
+		.inc4		  = KX132_REG_INC4,
+		.inc5		  = KX132_REG_INC5,
+		.inc6		  = KX132_REG_INC6,
+		.xout_l		  = KX132_REG_XOUT_L,
+	},
 };
 EXPORT_SYMBOL_NS_GPL(kx_chip_info, IIO_KX022A);
 
diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h
index 3bb40e9f5613..7e43bdb37156 100644
--- a/drivers/iio/accel/kionix-kx022a.h
+++ b/drivers/iio/accel/kionix-kx022a.h
@@ -90,8 +90,61 @@
 #define KX022A_REG_SELF_TEST	0x60
 #define KX022A_MAX_REGISTER	0x60
 
+
+#define KX132_REG_WHO		0x13
+#define KX132_ID		0x3d
+
+#define KX132_FIFO_LENGTH	86
+
+#define KX132_REG_CNTL2		0x1c
+#define KX132_REG_CNTL		0x1b
+#define KX132_MASK_RES		BIT(6)
+#define KX132_GSEL_2		0x0
+#define KX132_GSEL_4		BIT(3)
+#define KX132_GSEL_8		BIT(4)
+#define KX132_GSEL_16		GENMASK(4, 3)
+
+#define KX132_REG_INS2		0x17
+#define KX132_MASK_INS2_WMI	BIT(5)
+
+#define KX132_REG_XADP_L	0x02
+#define KX132_REG_XOUT_L	0x08
+#define KX132_REG_YOUT_L	0x0a
+#define KX132_REG_ZOUT_L	0x0c
+#define KX132_REG_COTR		0x12
+#define KX132_REG_TSCP		0x14
+#define KX132_REG_INT_REL	0x1a
+
+#define KX132_REG_ODCNTL	0x21
+
+#define KX132_REG_BTS_WUF_TH	0x4a
+#define KX132_REG_MAN_WAKE	0x4d
+
+#define KX132_REG_BUF_CNTL1	0x5e
+#define KX132_REG_BUF_CNTL2	0x5f
+#define KX132_REG_BUF_STATUS_1	0x60
+#define KX132_REG_BUF_STATUS_2	0x61
+#define KX132_MASK_BUF_SMP_LVL	GENMASK(9, 0)
+#define KX132_REG_BUF_CLEAR	0x62
+#define KX132_REG_BUF_READ	0x63
+#define KX132_ODR_SHIFT		3
+#define KX132_FIFO_MAX_WMI_TH	86
+
+#define KX132_REG_INC1		0x22
+#define KX132_REG_INC5		0x26
+#define KX132_REG_INC6		0x27
+#define KX132_IPOL_LOW		0
+#define KX132_IPOL_HIGH		KX_MASK_IPOL
+#define KX132_ITYP_PULSE	KX_MASK_ITYP
+
+#define KX132_REG_INC4		0x25
+
+#define KX132_REG_SELF_TEST	0x5d
+#define KX132_MAX_REGISTER	0x76
+
 enum kx022a_device_type {
 	KX022A,
+	KX132,
 };
 
 enum {
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux