Re: [PATCH v3 4/5] usb: cdns3: add StarFive JH7110 USB driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/3/16 10:46, Peter Chen wrote:
> On 23-03-15 18:44:10, Minda Chen wrote:
>> There is a Cadence USB3 core for JH7110 SoCs, the cdns
>> core is the child of this USB wrapper module device.
>> 
>> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
>> ---
>>  MAINTAINERS                        |   7 +
>>  drivers/usb/cdns3/Kconfig          |  11 ++
>>  drivers/usb/cdns3/Makefile         |   1 +
>>  drivers/usb/cdns3/cdns3-starfive.c | 305 +++++++++++++++++++++++++++++
>>  4 files changed, 324 insertions(+)
>>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>> 
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 4263c005e45c..c530c966ab26 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19985,6 +19985,13 @@ F:	Documentation/devicetree/bindings/phy/starfive,jh7110-usb-pcie-phy.yaml
>>  F:	drivers/phy/starfive/phy-jh7110-pcie.c
>>  F:	drivers/phy/starfive/phy-jh7110-usb.c
>>  
>> +STARFIVE JH71X0 USB DRIVERS
>> +M:	Emil Renner Berthing <kernel@xxxxxxxx>
>> +M:	Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
>> +S:	Maintained
>> +F:	Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>> +F:	drivers/usb/cdns3/cdns3-starfive.c
>> +
>>  STATIC BRANCH/CALL
>>  M:	Peter Zijlstra <peterz@xxxxxxxxxxxxx>
>>  M:	Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
>> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
>> index b98ca0a1352a..0a514b591527 100644
>> --- a/drivers/usb/cdns3/Kconfig
>> +++ b/drivers/usb/cdns3/Kconfig
>> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>>  
>>  	  For example, imx8qm and imx8qxp.
>>  
>> +config USB_CDNS3_STARFIVE
>> +	tristate "Cadence USB3 support on StarFive SoC platforms"
>> +	depends on ARCH_STARFIVE || COMPILE_TEST
>> +	help
>> +	  Say 'Y' or 'M' here if you are building for StarFive SoCs
>> +	  platforms that contain Cadence USB3 controller core.
>> +
>> +	  e.g. JH7110.
>> +
>> +	  If you choose to build this driver as module it will
>> +	  be dynamically linked and module will be called cdns3-starfive.ko
>>  endif
>>  
>>  if USB_CDNS_SUPPORT
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index 61edb2f89276..48dfae75b5aa 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -24,6 +24,7 @@ endif
>>  obj-$(CONFIG_USB_CDNS3_PCI_WRAP)		+= cdns3-pci-wrap.o
>>  obj-$(CONFIG_USB_CDNS3_TI)			+= cdns3-ti.o
>>  obj-$(CONFIG_USB_CDNS3_IMX)			+= cdns3-imx.o
>> +obj-$(CONFIG_USB_CDNS3_STARFIVE)		+= cdns3-starfive.o
>>  
>>  cdnsp-udc-pci-y					:= cdnsp-pci.o
>>  
>> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
>> new file mode 100644
>> index 000000000000..a99f98f85235
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/cdns3-starfive.c
>> @@ -0,0 +1,305 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/**
>> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
>> + *
>> + * Copyright (C) 2022 Starfive, Inc.
>> + * Author:	Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>> + * Author:	Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>
>> + * Author:	Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/io.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/usb/otg.h>
>> +#include "core.h"
>> +
>> +#define USB_STRAP_HOST			BIT(17)
>> +#define USB_STRAP_DEVICE		BIT(18)
>> +#define USB_STRAP_MASK			GENMASK(18, 16)
>> +
>> +#define USB_SUSPENDM_HOST		BIT(19)
>> +#define USB_SUSPENDM_MASK		BIT(19)
>> +
>> +#define USB_SUSPENDM_BYPS		BIT(20)
>> +#define USB_REFCLK_MODE			BIT(23)
>> +#define USB_PLL_EN			BIT(22)
>> +#define USB_PDRSTN_SPLIT		BIT(17)
>> +
>> +#define PCIE_CKREF_SRC_MASK		GENMASK(19, 18)
>> +#define PCIE_CLK_SEL_MASK		GENMASK(21, 20)
>> +#define PCIE_PHY_MODE			BIT(20)
>> +#define PCIE_PHY_MODE_MASK		GENMASK(21, 20)
>> +#define PCIE_USB3_BUS_WIDTH_MASK	GENMASK(3, 2)
>> +#define PCIE_USB3_RATE_MASK		GENMASK(6, 5)
>> +#define PCIE_USB3_RX_STANDBY_MASK	BIT(7)
>> +#define PCIE_USB3_PHY_ENABLE		BIT(4)
>> +
>> +struct cdns_starfive {
>> +	struct device *dev;
>> +	struct regmap *stg_syscon;
>> +	struct regmap *sys_syscon;
>> +	struct reset_control *resets;
>> +	struct clk_bulk_data *clks;
>> +	int num_clks;
>> +	u32 sys_offset;
>> +	u32 stg_offset_4;
>> +	u32 stg_offset_196;
>> +	u32 stg_offset_328;
>> +	u32 stg_offset_500;
>> +	bool usb2_only;
>> +};
>> +
>> +static int cdns_mode_init(struct platform_device *pdev,
>> +				struct cdns_starfive *data, const char **out_mode)
>> +{
>> +	struct device_node *child;
>> +	const char *dr_mode = NULL;
>> +
>> +	child = of_get_compatible_child(pdev->dev.of_node, "cdns,usb3");
>> +	if (!child) {
>> +		return dev_err_probe(&pdev->dev, -ENODEV,
>> +			"Failed to find child node\n");
>> +	}
>> +
>> +	/* Init usb 2.0 utmi phy */
>> +	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +		USB_SUSPENDM_BYPS, USB_SUSPENDM_BYPS);
>> +	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +		USB_PLL_EN, USB_PLL_EN);
>> +	regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +		USB_REFCLK_MODE, USB_REFCLK_MODE);
>> +
>> +	if (!of_find_property(child, "cdns3,usb3-phy", NULL)) {
>> +		/* Disconnect usb 3.0 phy mode */
>> +		regmap_update_bits(data->sys_syscon, data->sys_offset,
>> +			USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
>> +		data->usb2_only = 1;
>> +	} else {
>> +		/* Config usb 3.0 pipe phy */
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
>> +			PCIE_CKREF_SRC_MASK, 0);
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_196,
>> +			PCIE_CLK_SEL_MASK, 0);
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_328,
>> +			PCIE_PHY_MODE_MASK, PCIE_PHY_MODE);
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +			PCIE_USB3_BUS_WIDTH_MASK, 0);
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +			PCIE_USB3_RATE_MASK, 0);
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +			PCIE_USB3_RX_STANDBY_MASK, 0);
>> +		regmap_update_bits(data->stg_syscon, data->stg_offset_500,
>> +			PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE);
>> +
>> +		/* Connect usb 3.0 phy mode */
>> +		regmap_update_bits(data->sys_syscon, data->sys_offset,
>> +			USB_PDRSTN_SPLIT, 0);
>> +	}
>> +
>> +	if (!of_property_read_string(child, "dr_mode", &dr_mode)) {
>> +		if (!strcmp(dr_mode, "host")) {
>> +			regmap_update_bits(data->stg_syscon,
>> +				data->stg_offset_4,
>> +				USB_STRAP_MASK,
>> +				USB_STRAP_HOST);
>> +			regmap_update_bits(data->stg_syscon,
>> +				data->stg_offset_4,
>> +				USB_SUSPENDM_MASK,
>> +				USB_SUSPENDM_HOST);
>> +		} else if (!strcmp(dr_mode, "peripheral")) {
>> +			regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +				USB_STRAP_MASK, USB_STRAP_DEVICE);
>> +			regmap_update_bits(data->stg_syscon, data->stg_offset_4,
>> +				USB_SUSPENDM_MASK, 0);
>> +		}
>> +	}
>> +
>> +	if (out_mode)
>> +		*out_mode = dr_mode;
>> +
>> +	return 0;
>> +}
>> +
>> +static int cdns_clk_rst_init(struct cdns_starfive *data)
>> +{
>> +	int ret;
>> +
>> +	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
>> +	if (data->num_clks < 0)
>> +		return dev_err_probe(data->dev, -ENODEV,
>> +			"Failed to get clocks\n");
>> +
>> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> +	if (ret)
>> +		return dev_err_probe(data->dev, ret,
>> +			"failed to enable clocks\n");
>> +
>> +	data->resets = devm_reset_control_array_get_exclusive(data->dev);
>> +	if (IS_ERR(data->resets)) {
>> +		ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
>> +			"Failed to get resets");
>> +		goto err_clk_init;
>> +	}
>> +
>> +	ret = reset_control_deassert(data->resets);
>> +	if (ret) {
>> +		ret = dev_err_probe(data->dev, ret,
>> +			"failed to reset clocks\n");
>> +		goto err_clk_init;
>> +	}
>> +
>> +	return ret;
>> +
>> +err_clk_init:
>> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +	return ret;
>> +}
>> +
>> +static int cdns_starfive_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *node = pdev->dev.of_node;
>> +	struct cdns_starfive *data;
>> +	unsigned int args[4];
>> +	const char *dr_mode;
>> +	int ret;
>> +
>> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> +	if (!data)
>> +		return -ENOMEM;
>> +
>> +	platform_set_drvdata(pdev, data);
>> +
>> +	data->dev = dev;
>> +
>> +	data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
>> +		"starfive,stg-syscon", 4, args);
>> +
>> +	if (IS_ERR(data->stg_syscon))
>> +		return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
>> +			"Failed to parse starfive,stg-syscon\n");
>> +
>> +	data->stg_offset_4 = args[0];
>> +	data->stg_offset_196 = args[1];
>> +	data->stg_offset_328 = args[2];
>> +	data->stg_offset_500 = args[3];
>> +
>> +	data->sys_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
>> +		"starfive,sys-syscon", 1, args);
>> +	if (IS_ERR(data->sys_syscon))
>> +		return dev_err_probe(dev, PTR_ERR(data->sys_syscon),
>> +			"Failed to parse starfive,sys-syscon\n");
>> +
>> +	data->sys_offset = args[0];
>> +
>> +	ret = cdns_mode_init(pdev, data, &dr_mode);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = cdns_clk_rst_init(data);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = of_platform_populate(node, NULL, NULL, dev);
>> +	if (ret)
>> +		return dev_err_probe(dev, ret, "Failed to create children\n");
>> +
>> +	device_set_wakeup_capable(dev, true);
>> +	pm_runtime_set_active(dev);
>> +	pm_runtime_enable(dev);
>> +
>> +	dev_info(dev, "usb mode %s %s probe success\n",
>> +		dr_mode ? dr_mode : "unknown", data->usb2_only ? "2.0" : "3.0");
>> +
>> +	return 0;
>> +}
>> +
>> +static int cdns_starfive_remove_core(struct device *dev, void *c)
>> +{
>> +	struct platform_device *pdev = to_platform_device(dev);
>> +
>> +	platform_device_unregister(pdev);
>> +
>> +	return 0;
>> +}
>> +
>> +static int cdns_starfive_remove(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> +	pm_runtime_get_sync(dev);
>> +	device_for_each_child(dev, NULL, cdns_starfive_remove_core);
>> +
>> +	reset_control_assert(data->resets);
>> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +	pm_runtime_disable(dev);
>> +	pm_runtime_put_noidle(dev);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int cdns_starfive_resume(struct device *dev)
>> +{
>> +	struct cdns_starfive *data = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = reset_control_deassert(data->resets);
>> +	if (ret)
>> +		return ret;
>> +
> 
> So, you clk enable and reset has no sequence requirements? I see the
> sequence is not the same between resume and suspend routine.
> 
> Peter
Thanks, suspend seq should be inverted. I will change the suspend reset and enable sequence.
>> +	return 0;
>> +}
>> +
>> +static int cdns_starfive_suspend(struct device *dev)
>> +{
>> +	struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +	reset_control_assert(data->resets);
I will invert this sequence. But these still can work.
>> +
>> +	return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
>> +	SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
>> +	SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
>> +};
>> +
>> +static const struct of_device_id cdns_starfive_of_match[] = {
>> +	{ .compatible = "starfive,jh7110-usb", },
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
>> +
>> +static struct platform_driver cdns_starfive_driver = {
>> +	.probe		= cdns_starfive_probe,
>> +	.remove		= cdns_starfive_remove,
>> +	.driver		= {
>> +		.name	= "cdns3-starfive",
>> +		.of_match_table	= cdns_starfive_of_match,
>> +		.pm	= &cdns_starfive_pm_ops,
>> +	},
>> +};
>> +module_platform_driver(cdns_starfive_driver);
>> +
>> +MODULE_ALIAS("platform:cdns3-starfive");
>> +MODULE_AUTHOR("YanHong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>");
>> +MODULE_AUTHOR("Mason Huo <mason.huo@xxxxxxxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
>> -- 
>> 2.17.1
>> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux