Drop the phy-reset-duration and phy-reset-gpios deprecated properties and
move reset-gpios under the switch node.
Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
Changes in v2:
- new patch
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index aacbf317feea..cb1972f8e8d2 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -106,8 +106,6 @@ &fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
status = "okay";
@@ -131,6 +129,7 @@ phy_port3: phy@2 {
switch@10 {
compatible = "qca,qca8334";
reg = <10>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
switch_ports: ports {
#address-cells = <1>;
--
2.25.1
