Hi,
Patches 1,2,3 are new in this v2 series and fixes minor issues for
the already supported boards. Patches 4 and 5 adds support for some
new redesigned boards based on i.MX6 SoC.
Michal Vokáč (5):
ARM: dts: imx6dl-yapp4: Move phy reset into switch node
ARM: dts: imx6dl-yapp4: Move status to the end of property list
ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and
Pegasus+
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the
IOTA board
.../devicetree/bindings/arm/fsl.yaml | 4 +
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 7 +-
arch/arm/boot/dts/imx6dl-yapp4-lynx.dts | 58 ++
arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts | 42 ++
arch/arm/boot/dts/imx6dl-yapp43-common.dtsi | 615 ++++++++++++++++++
arch/arm/boot/dts/imx6q-yapp4-pegasus.dts | 58 ++
.../boot/dts/imx6qp-yapp4-pegasus-plus.dts | 58 ++
8 files changed, 841 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
create mode 100644 arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
create mode 100644 arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
--
2.25.1
