Add YAML devicetree binding for AWINIC AW20036/AW20052/AW20074 led driver. Signed-off-by: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx> --- .../bindings/leds/awinic,aw200xx.yaml | 126 ++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml new file mode 100644 index 000000000000..feb5febaf361 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AWINIC AW200XX LED + +maintainers: + - Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx> + +description: | + This controller is present on AW20036/AW20054/AW20072. + It is a 3x12/6x9/6x12 matrix LED programmed via + an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs, + 3 pattern controllers for auto breathing or group dimming control. + + For more product information please see the link below: + aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs + aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs + aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs + +properties: + compatible: + enum: + - awinic,aw20036 + - awinic,aw20054 + - awinic,aw20072 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + awinic,display-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Leds matrix size + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + LED number + maxItems: 1 + + led-max-microamp: + default: 9780 + description: | + Note that a driver will take the minimum of all LED limits + since the chip has a single global setting. + The maximum output current of each LED is calculated by the + following formula: + IMAXled = 160000 * (592 / 600.5) * (1 / display-rows) + And the minimum output current formula: + IMINled = 3300 * (592 / 600.5) * (1 / display-rows) + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - awinic,display-rows + +allOf: + - if: + properties: + compatible: + contains: + const: awinic,aw20036 + then: + properties: + awinic,display-rows: + enum: [1, 2, 3] + else: + properties: + awinic,display-rows: + enum: [1, 2, 3, 4, 5, 6, 7] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@3a { + compatible = "awinic,aw20036"; + reg = <0x3a>; + #address-cells = <1>; + #size-cells = <0>; + awinic,display-rows = <3>; + + led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RED>; + led-max-microamp = <9780>; + }; + + led@1 { + reg = <0x1>; + color = <LED_COLOR_ID_GREEN>; + led-max-microamp = <9780>; + }; + + led@2 { + reg = <0x2>; + color = <LED_COLOR_ID_BLUE>; + led-max-microamp = <9780>; + }; + }; + }; + +... -- 2.37.2
