-------- 原始信息 --------
主题: Re: [PATCH v5 06/12] net: stmmac: Add glue layer for StarFive JH7110 SoC
From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
收件人: Guo Samin <samin.guo@xxxxxxxxxxxxxxxx>
日期: 2023/3/10
> On Fri, 10 Mar 2023 at 02:55, Guo Samin <samin.guo@xxxxxxxxxxxxxxxx> wrote:
>> -------- 原始信息 --------
>> 主题: Re: [PATCH v5 06/12] net: stmmac: Add glue layer for StarFive JH7110 SoC
>> From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
>> 收件人: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
>> 日期: 2023/3/10
>>
>>> On Fri, 10 Mar 2023 at 01:02, Emil Renner Berthing
>>> <emil.renner.berthing@xxxxxxxxxxxxx> wrote:
>>>> On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@xxxxxxxxxxxxxxxx> wrote:
>>>>>
>>>>> This adds StarFive dwmac driver support on the StarFive JH7110 SoC.
>>>>>
>>>>> Co-developed-by: Emil Renner Berthing <kernel@xxxxxxxx>
>>>>> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
>>>>> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
>>>>> ---
>>>>> MAINTAINERS | 1 +
>>>>> drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
>>>>> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
>>>>> .../ethernet/stmicro/stmmac/dwmac-starfive.c | 125 ++++++++++++++++++
>>>>> 4 files changed, 139 insertions(+)
>>>>> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>>>>>
>>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>>> index 4e236b7c7fd2..91a4f190c827 100644
>>>>> --- a/MAINTAINERS
>>>>> +++ b/MAINTAINERS
>>>>> @@ -19916,6 +19916,7 @@ STARFIVE DWMAC GLUE LAYER
>>>>> M: Emil Renner Berthing <kernel@xxxxxxxx>
>>>>> M: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
>>>>> S: Maintained
>>>>> +F: Documentation/devicetree/bindings/net/dwmac-starfive.c
>>>>> F: Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>>>>>
>>>>> STARFIVE JH71X0 CLOCK DRIVERS
>>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>>> index f77511fe4e87..47fbccef9d04 100644
>>>>> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
>>>>> @@ -165,6 +165,18 @@ config DWMAC_SOCFPGA
>>>>> for the stmmac device driver. This driver is used for
>>>>> arria5 and cyclone5 FPGA SoCs.
>>>>>
>>>>> +config DWMAC_STARFIVE
>>>>> + tristate "StarFive dwmac support"
>>>>> + depends on OF && (ARCH_STARFIVE || COMPILE_TEST)
>>>>> + depends on STMMAC_ETH
>>>>> + default ARCH_STARFIVE
>>>>> + help
>>>>> + Support for ethernet controllers on StarFive RISC-V SoCs
>>>>> +
>>>>> + This selects the StarFive platform specific glue layer support for
>>>>> + the stmmac device driver. This driver is used for StarFive JH7110
>>>>> + ethernet controller.
>>>>> +
>>>>> config DWMAC_STI
>>>>> tristate "STi GMAC support"
>>>>> default ARCH_STI
>>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>>> index 057e4bab5c08..8738fdbb4b2d 100644
>>>>> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
>>>>> @@ -23,6 +23,7 @@ obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o
>>>>> obj-$(CONFIG_DWMAC_QCOM_ETHQOS) += dwmac-qcom-ethqos.o
>>>>> obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
>>>>> obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
>>>>> +obj-$(CONFIG_DWMAC_STARFIVE) += dwmac-starfive.o
>>>>> obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
>>>>> obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
>>>>> obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
>>>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>>>>> new file mode 100644
>>>>> index 000000000000..566378306f67
>>>>> --- /dev/null
>>>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
>>>>> @@ -0,0 +1,125 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>>> +/*
>>>>> + * StarFive DWMAC platform driver
>>>>> + *
>>>>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>>>>> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
>>>>> + *
>>>>> + */
>>>>> +
>>>>> +#include <linux/of_device.h>
>>>>> +
>>>>> +#include "stmmac_platform.h"
>>>>> +
>>>>> +struct starfive_dwmac {
>>>>> + struct device *dev;
>>>>> + struct clk *clk_tx;
>>>>> + struct clk *clk_gtx;
>>>>> + bool tx_use_rgmii_rxin_clk;
>>>>> +};
>>>>> +
>>>>> +static void starfive_eth_fix_mac_speed(void *priv, unsigned int speed)
>>>>> +{
>>>>> + struct starfive_dwmac *dwmac = priv;
>>>>> + unsigned long rate;
>>>>> + int err;
>>>>> +
>>>>> + /* Generally, the rgmii_tx clock is provided by the internal clock,
>>>>> + * which needs to match the corresponding clock frequency according
>>>>> + * to different speeds. If the rgmii_tx clock is provided by the
>>>>> + * external rgmii_rxin, there is no need to configure the clock
>>>>> + * internally, because rgmii_rxin will be adaptively adjusted.
>>>>> + */
>>>>> + if (dwmac->tx_use_rgmii_rxin_clk)
>>>>> + return;
>>>>> +
>>>>> + switch (speed) {
>>>>> + case SPEED_1000:
>>>>> + rate = 125000000;
>>>>> + break;
>>>>> + case SPEED_100:
>>>>> + rate = 25000000;
>>>>> + break;
>>>>> + case SPEED_10:
>>>>> + rate = 2500000;
>>>>> + break;
>>>>> + default:
>>>>> + dev_err(dwmac->dev, "invalid speed %u\n", speed);
>>>>> + break;
>>>>> + }
>>>>> +
>>>>> + err = clk_set_rate(dwmac->clk_tx, rate);
>>>>
>>>> Hi Samin,
>>>>
>>>> I tried exercising this code by forcing the interface to downgrade
>>>> from 1000Mbps to 100Mbps (ethtool -s end0 speed 100), and it doesn't
>>>> seem to work. The reason is that clk_tx is a mux, and when you call
>>>> clk_set_rate it will try to find the parent with the closest clock
>>>> rate instead of adjusting the current parent as is needed here.
>>>> However that is easily fixed by calling clk_set_rate on clk_gtx which
>>>> is just a gate that *will* propagate the rate change to the parent.
>>>>
>>>> With this change, this piece of code and downgrading from 1000Mbps to
>>>> 100Mbps works on the JH7100. However on the JH7110 there is a second
>>>> problem. The parent of clk_gtx, confusingly called
>>>> clk_gmac{0,1}_gtxclk is a divider (and gate) that takes the 1GHz PLL0
>>>> clock and divides it by some integer. But according to [1] it can at
>>>> most divide by 15 which is not enough to generate the 25MHz clock
>>>> needed for 100Mbps. So now I wonder how this is supposed to work on
>>>> the JH7110.
>>>>
>>>> [1]: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_crg.html#sys_crg__section_skz_fxm_wsb
>>>
>>> Ah, I see now that gmac0_gtxclk is only used by gmac0 on the
>>> VisionFive 2 v1.2A, where I think it's a known problem that only
>>> 1000Mbps works.
>>> On the 1.3B this function is not used at all, and I guess it also
>>> ought to be skipped for gmac1 of the 1.2A using the rmii interface so
>>> it doesn't risk changing the parent of the tx clock.
>>>
>> Hi Emil,
>>
>> V1.2A gmac0 only supports 1000M due to known problem, and v1.2A gmac1 supports 100M/10M.
>>
>> V1.2A gmac1 uses a parent clock from gmac1_rmii_rtx, whose parent clock is from external phy clock gmac1_rmii_refin (fixed is 50M).
>> The default frequency division value of gmac1_rmii_rtx is 2, so it can work in 100M mode. （clk_tx: 50/2=25M ===> 100M mode）.
>> When gmac1 switches to 10M mode, the clock frequency of gmac1_rmii_rtx needs to be modified to 2.5M.
>> So,if 1.2A gmac1 is skipped the starfive_eth_fix_mac_speed, 10M mode will be unavailable.
>>
>> gmac1_rmii_refin（50M) ==> gmac1_rmii_rtx（div 2, by default) ==> clk_tx (25M) （100M mode）
>> gmac1_rmii_refin（50M）==> gmac1_rmii_rtx（div 20) ==> clk_tx (2.5M) （10M mode）
>>
>
> I see. So on the JH7110 it is only when using gmac{0,1}_rmii_rtx ->
> clk_tx with the rmii interface that this function is needed?
>
> As noted above using the current fix_mac_speed with gmac{0,1}_gtxclk
> -> clk_tx will produce wrong results, so for the VF2 v1.2A you
> probably just want something like this in the device tree
> &gmac0 {
> assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>, <&syscrg
> JH7110_SYSCLK_GMAC0_GTXCLK>;
> assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
> assigned-clock-rates = <0> <125000000>;
> };
>
> ..and then don't set the fix_mac_speed callback.
>
Hi Emil,
This works on v1.2a with gmac0, but gmac1 does not. gmac1 have to setting the fix_mac_speed as mentioned above。
Moreover，fix_mac_speed is also can be used on JH7100 I guess.
So, keeping fix_mac_speed callback can make the code more compatible?
Best regards,
Samin
>> Of course, as you mentioned earlier, we need to add gmac1_clk_tx uses CLK_SET_RATE_PARENT flag.
>
> Yes, I'm not too sure how clk_set_rate on mux'es are supposed to work,
> but if you can convince Hal and Stephen (the clock maintainer) that
> clk_set_rate should always propagate the rate change to the current
> parent, then I'm fine with it.
> I tested it with CLK_SET_RATE_PARENT flag in gmacX_clk_tx with HAL's clktree driver,
Setting the frequency of gmacX_clk_tx can take effect on clk_rmii_rtx.
Tested on v1.2A:
# mount -t debugfs none /sys/kernel/debug
# cat /sys/kernel/debug/clk/gmac1_tx/clk_parent
gmac1_rmii_rtx
# cat /sys/kernel/debug/clk/gmac1_tx/clk_rate
25000000
# cat /sys/kernel/debug/clk/gmac1_rmii_rtx/clk_rate
25000000
# ethtool -s eth1 speed 10 duplex full
# starfive-dwmac 16040000.ethernet eth1: Link is Down
starfive-dwmac 16040000.ethernet eth1: Link is Up - 10Mbps/Full - flow control rx/tx
# cat /sys/kernel/debug/clk/gmac1_tx/clk_rate
2500000
# cat /sys/kernel/debug/clk/gmac1_rmii_rtx/clk_rate
2500000
In addition, I have tested that all the following modes can work:
For v1.2A:
gmac0: 1000M
gmac1: 100M/10M
For v1.3B:
gmac0: 1000M/100M/10M
gmac1: 1000M/100M/10M
Best regards,
Samin
> Alternatively you can add an optional clock to the bindings, and only
> if the optional clock is set then set the fix_mac_speed callback to
> modify the rate of that clock. This way you won't need the special
> "starfive,tx-use-rgmii-clk" flag either.
>
> /Emil
>>
>> Best regards,
>> Samin
>>
>>>>> + if (err)
>>>>> + dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
>>>>> +}
>>>>> +
>>>>> +static int starfive_dwmac_probe(struct platform_device *pdev)
>>>>> +{
>>>>> + struct plat_stmmacenet_data *plat_dat;
>>>>> + struct stmmac_resources stmmac_res;
>>>>> + struct starfive_dwmac *dwmac;
>>>>> + int err;
>>>>> +
>>>>> + err = stmmac_get_platform_resources(pdev, &stmmac_res);
>>>>> + if (err)
>>>>> + return err;
>>>>> +
>>>>> + plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
>>>>> + if (IS_ERR(plat_dat)) {
>>>>> + dev_err(&pdev->dev, "dt configuration failed\n");
>>>>> + return PTR_ERR(plat_dat);
>>>>> + }
>>>>> +
>>>>> + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
>>>>> + if (!dwmac)
>>>>> + return -ENOMEM;
>>>>> +
>>>>> + dwmac->clk_tx = devm_clk_get_enabled(&pdev->dev, "tx");
>>>>> + if (IS_ERR(dwmac->clk_tx))
>>>>> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx),
>>>>> + "error getting tx clock\n");
>>>>> +
>>>>> + dwmac->clk_gtx = devm_clk_get_enabled(&pdev->dev, "gtx");
>>>>> + if (IS_ERR(dwmac->clk_gtx))
>>>>> + return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_gtx),
>>>>> + "error getting gtx clock\n");
>>>>> +
>>>>> + if (device_property_read_bool(&pdev->dev, "starfive,tx-use-rgmii-clk"))
>>>>> + dwmac->tx_use_rgmii_rxin_clk = true;
>>>>> +
>>>>> + dwmac->dev = &pdev->dev;
>>>>> + plat_dat->fix_mac_speed = starfive_eth_fix_mac_speed;
>>>>> + plat_dat->init = NULL;
>>>>> + plat_dat->bsp_priv = dwmac;
>>>>> + plat_dat->dma_cfg->dche = true;
>>>>> +
>>>>> + err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
>>>>> + if (err) {
>>>>> + stmmac_remove_config_dt(pdev, plat_dat);
>>>>> + return err;
>>>>> + }
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static const struct of_device_id starfive_dwmac_match[] = {
>>>>> + { .compatible = "starfive,jh7110-dwmac" },
>>>>> + { /* sentinel */ }
>>>>> +};
>>>>> +MODULE_DEVICE_TABLE(of, starfive_dwmac_match);
>>>>> +
>>>>> +static struct platform_driver starfive_dwmac_driver = {
>>>>> + .probe = starfive_dwmac_probe,
>>>>> + .remove = stmmac_pltfr_remove,
>>>>> + .driver = {
>>>>> + .name = "starfive-dwmac",
>>>>> + .pm = &stmmac_pltfr_pm_ops,
>>>>> + .of_match_table = starfive_dwmac_match,
>>>>> + },
>>>>> +};
>>>>> +module_platform_driver(starfive_dwmac_driver);
>>>>> +
>>>>> +MODULE_LICENSE("GPL");
>>>>> +MODULE_DESCRIPTION("StarFive DWMAC platform driver");
>>>>> +MODULE_AUTHOR("Emil Renner Berthing <kernel@xxxxxxxx>");
>>>>> +MODULE_AUTHOR("Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>");
>>>>> --
>>>>> 2.17.1
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> linux-riscv mailing list
>>>>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
>>
--
Best regards,
Samin
