hi Shawn and all interested in the Librem 5 phone,
This is another round of updates to the phone DT description. Some are
clear fixes, but some are important updates like the CSI changes
that make the selfie cam work or the powersaving related things like
the ddrc opp table entry and voltage changes.
As previously this is all mixed together because the changes are small.
If you prefer separate, small "topic-patchsets", please say so.
thanks,
martin
Angus Ainslie (1):
arm64: dts: imx8mq-librem5: add the magnetometer mount matrix
Martin Kepplinger (4):
arm64: dts: imx8mq-librem5: lower the mipi csi 1 frequencies
arm64: dts: imx8mq-librem5: describe the clock for the csi sensors
arm64: dts: imx8mq-librem5: fix audio-1v8 regulator name
arm64: dts: imx8mq-librem5: add brightness levels to led-backlight
Sebastian Krzyszkowiak (9):
arm64: dts: imx8mq-librem5: Describe MIC_2V4 regulator
arm64: dts: imx8mq-librem5: Set charger parameters for each batch
arm64: dts: imx8mq-librem5: Set the DVS voltages lower
arm64: dts: imx8mq-librem5: Bump usdhc2 frequency to 100MHz
arm64: dts: imx8mq-librem5: Adjust proximity sensor's near levels
arm64: dts: imx8mq-librem5: Remove dis_u3_susphy_quirk from usb_dwc3_0
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V
arm64: dts: imx8mq-librem5: Reduce I2C frequency to 384kHz
arm64: dts: imx8mq-librem5: Add 166MHz to DDRC OPP table
.../boot/dts/freescale/imx8mq-librem5-r2.dts | 12 ++--
.../boot/dts/freescale/imx8mq-librem5-r3.dts | 2 +-
.../boot/dts/freescale/imx8mq-librem5-r3.dtsi | 10 ++-
.../boot/dts/freescale/imx8mq-librem5-r4.dts | 2 +-
.../boot/dts/freescale/imx8mq-librem5.dtsi | 70 ++++++++++++++-----
5 files changed, 67 insertions(+), 29 deletions(-)
--
2.30.2
