From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
RS9116 card already limits itself to 50MHz by being a high-speed card,
while AP6275S can work at 100MHz just fine (technically it should work
at 200MHz as well since it's a SDR104 card, but it doesn't appear to be
the case in practice and further research will be needed to find out why).
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 7e470135b86a4..0b4b49fa1392a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1389,7 +1389,7 @@ &usdhc2 {
mmc-pwrseq = <&usdhc2_pwrseq>;
post-power-on-delay-ms = <1000>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
disable-wp;
cap-sdio-irq;
keep-power-in-suspend;
--
2.30.2
