On 08/03/2023 11:35, Svyatoslav Ryhel wrote:
> ср, 8 бер. 2023 р. о 12:25 Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> пише:
>>
>> On 08/03/2023 10:40, Svyatoslav Ryhel wrote:
>>> Some devices may need a specific supply provided
>>> for this sensor to work properly, like p895 does.
>>>
>>> Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
>>> ---
>>> drivers/hwmon/ina2xx.c | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>> diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
>>> index 00fc70305a89..4a3e2b1bbe8b 100644
>>> --- a/drivers/hwmon/ina2xx.c
>>> +++ b/drivers/hwmon/ina2xx.c
>>> @@ -119,6 +119,7 @@ struct ina2xx_data {
>>> long power_lsb_uW;
>>> struct mutex config_lock;
>>> struct regmap *regmap;
>>> + struct regulator *vdd_supply;
>>>
>>> const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
>>> };
>>> @@ -656,6 +657,17 @@ static int ina2xx_probe(struct i2c_client *client)
>>> return PTR_ERR(data->regmap);
>>> }
>>>
>>> + data->vdd_supply = devm_regulator_get_optional(dev, "vdd");
>>> + if (IS_ERR(data->vdd_supply))
>>> + return dev_err_probe(dev, PTR_ERR(data->vdd_supply),
>>> + "failed to get vdd regulator\n");
>>> +
>>> + ret = regulator_enable(data->vdd_supply);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to enable vdd power supply\n");
>>> + return ret;
>>
>> And where is disable? On each error path, removal etc.
>>
>
> error path ok, should I create a remove function just to disable the regulator?
Unbind device. Then bind. Then unbind. Then check regulator status
(/sys/kernel/debug). Do you have the answer now?
Best regards,
Krzysztof
