pinctrl entries for the two GbE interfaces using RGMII signaling w/ the PHY
via MPP0-11/MPP12-23 and the spi0 interface using MPP36-39 are common
configurations. Instead of replicating them in each .dts file, put those in
armada-xp-mv78230.dtsi file so that they can be referenced.
Suggested-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 2592e1c13560..85a39aed00dd 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -171,6 +171,26 @@
compatible = "marvell,mv78230-pinctrl";
reg = <0x18000 0x38>;
+ ge0_rgmii_pins: ge0-rgmii-pins {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge1-rgmii-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge1";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
"mpp33", "mpp34", "mpp35";
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
