pinctrl entries for uart0 using MPP0-1 and spi0 using MPP33-36 are
common configurations. Instead of replicating them in each .dts file,
put those in armada-370.dtsi file so that they can be referenced.
Suggested-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-370.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 6b3c23b1e138..d9f5d59e463e 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -115,6 +115,17 @@
compatible = "marvell,mv88f6710-pinctrl";
reg = <0x18000 0x38>;
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "uart0";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp33", "mpp34",
+ "mpp35", "mpp36";
+ marvell,function = "spi0";
+ };
+
sdio_pins1: sdio-pins1 {
marvell,pins = "mpp9", "mpp11", "mpp12",
"mpp13", "mpp14", "mpp15";
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
