在 2023/3/6 21:04:28, Emil Renner Berthing 写道:
> On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@xxxxxxxxxxxxxxxx> wrote:
>> From: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>>
>> Update gmac device tree node status to okay.
>>
>> Signed-off-by: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
>> ---
>> .../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index c2aa8946a0f1..d1c409f40014 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -12,6 +12,8 @@
>> / {
>> aliases {
>> serial0 = &uart0;
>> + ethernet0 = &gmac0;
>> + ethernet1 = &gmac1;
>
> Please sort these alphabetically.
Thanks, will fix.
>
>> i2c0 = &i2c0;
>> i2c2 = &i2c2;
>> i2c5 = &i2c5;
>> @@ -92,6 +94,14 @@
>> status = "okay";
>> };
>>
>> +&gmac0 {
>> + status = "okay";
>> +};
>> +
>> +&gmac1 {
>> + status = "okay";
>> +};
>
> Since you'll need to add to the gmac0 and gmac1 nodes in the board
> specific files too and it's only one line, consider just dropping this
> here and add the status = "okay" there instead.
>
According to Andrew's suggestion, can I put the nodes of mdio and phy here?
>> &i2c0 {
>> clock-frequency = <100000>;
>> i2c-sda-hold-time-ns = <300>;
>> --
>> 2.17.1
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
Best regards,
Samin
--
Best regards,
Samin
