On Fri, 3 Mar 2023 at 10:01, Samin Guo <samin.guo@xxxxxxxxxxxxxxxx> wrote:
> From: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
>
> Update gmac device tree node status to okay.
>
> Signed-off-by: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
> ---
> .../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index c2aa8946a0f1..d1c409f40014 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -12,6 +12,8 @@
> / {
> aliases {
> serial0 = &uart0;
> + ethernet0 = &gmac0;
> + ethernet1 = &gmac1;
Please sort these alphabetically.
> i2c0 = &i2c0;
> i2c2 = &i2c2;
> i2c5 = &i2c5;
> @@ -92,6 +94,14 @@
> status = "okay";
> };
>
> +&gmac0 {
> + status = "okay";
> +};
> +
> +&gmac1 {
> + status = "okay";
> +};
Since you'll need to add to the gmac0 and gmac1 nodes in the board
specific files too and it's only one line, consider just dropping this
here and add the status = "okay" there instead.
> &i2c0 {
> clock-frequency = <100000>;
> i2c-sda-hold-time-ns = <300>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
