[PATCH 16/19] arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The "mhi" region contains the debug registers that could be used to monitor
the PCIe link transitions.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 479859bd8ab3..0104e77dd8d5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2280,10 +2280,11 @@ opp-4 {
 		pcie0: pci@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
+			      <0 0x01c07000 0 0x1000>,
 			      <0 0x60000000 0 0xf1d>,
 			      <0 0x60000f20 0 0xa8>,
 			      <0 0x60100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "config";
+			reg-names = "parf", "mhi", "dbi", "elbi", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
@@ -2385,10 +2386,11 @@ pcie0_lane: phy@1c06200 {
 		pcie1: pci@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
+			      <0 0x01c0c000 0 0x1000>,
 			      <0 0x40000000 0 0xf1d>,
 			      <0 0x40000f20 0 0xa8>,
 			      <0 0x40100000 0 0x100000>;
-			reg-names = "parf", "dbi", "elbi", "config";
+			reg-names = "parf", "mhi", "dbi", "elbi", "config";
 			device_type = "pci";
 			linux,pci-domain = <1>;
 			bus-range = <0x00 0xff>;
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux