Hi, This series brings in several code cleanups and improvements to the Qualcomm PCIe controller drivers (RC and EP). The cleanup part mostly cleans up the bitfield definitions and transitions to bulk APIs for clocks, and resets. The improvement part renames the "mmio" region to "mhi" as per Qualcomm's internal documentation EP driver and also adds the debugfs entry to track link transition count in RC driver. Testing ------- I have tested this series on SDM845, SM8250 and SC8280XP based platforms. However, I'm counting on Qualcomm folks CCed to do testing on older IPQ/APQ platforms. Merging Strategy ---------------- Binding and driver patches through PCI tree and DTS patches through Qcom tree. NOTE: For the sake of maintaining dependency, I've clubbed both cleanup and improvement patches in the same series. If any of the maintainers prefer to have them splitted, please let me know. Thanks, Mani Manivannan Sadhasivam (19): PCI: qcom: Remove PCIE20_ prefix from register definitions PCI: qcom: Sort and group registers and bitfield definitions PCI: qcom: Use bitfield definitions for register fields PCI: qcom: Add missing macros for register fields PCI: qcom: Use lower case for hex PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0 PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0 PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2 PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3 PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3 PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0 PCI: qcom: Use macros for defining total no. of clocks & supplies dt-bindings: PCI: qcom-ep: Rename "mmio" region to "mhi" PCI: qcom-ep: Rename "mmio" region to "mhi" dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes PCI: qcom: Expose link transition counts via debugfs .../devicetree/bindings/pci/qcom,pcie-ep.yaml | 6 +- .../devicetree/bindings/pci/qcom,pcie.yaml | 12 +- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 15 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 9 +- drivers/pci/controller/dwc/pcie-qcom-ep.c | 38 +- drivers/pci/controller/dwc/pcie-qcom.c | 1009 ++++++----------- 7 files changed, 414 insertions(+), 681 deletions(-) -- 2.25.1
