On Fri, 3 Mar 2023 20:08:20 +0100, Tommaso Merciai wrote:
> Hello Hal,
> I start to play with jh7110-starfive-visionfive-2-v1.3b I have collect
> your series [3]. Now I'm trying to boot the image with the following
> cmds:
>
> setenv bootfile vmlinuz;
> setenv fileaddr a0000000;
> setenv fdtcontroladdr 0xffffffffffffffff;
> setenv ipaddr 10.0.0.100;
> setenv serverip 10.0.0.1;
> setenv kernel_comp_addr_r 0xb0000000;
> setenv kernel_comp_size 0x10000000;
> tftpboot ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb;
> tftpboot ${kernel_addr_r} Image.gz;
> run chipa_set_linux;
> booti ${kernel_addr_r} - ${fdt_addr_r}
>
>
> This the result:
>
> Bytes transferred = 109443584 (685fa00 hex)
> StarFive # run chipa_set_linux;
> StarFive # printenv file
> fileaddr filesize
> StarFive # printenv filesize
> filesize=685fa00
> StarFive # booti ${kernel_addr_r} - ${fdt_addr_r}
> Uncompressing Kernel Image
> ## Flattened Device Tree blob at 46000000
> Booting using the fdt blob at 0x46000000
> Using Device Tree in place at 0000000046000000, end 0000000046005c14
>
> Starting kernel ...
>
> clk u5_dw_i2c_clk_core already disabled
> clk u5_dw_i2c_clk_apb already disabled
>
> ---------------------------------------------
>
> I'm missing something? Any hints?
> Many thanks in advance! :)
You can try the instructions at the link [1]. The branch [1] is
based on v2 of this series, so you need to change the dtb name
to "jh7110-starfive-visionfive-2-v1.3b.dtb" when using tftpboot.
I will send v5 and update it to [1] this week.
[1] https://github.com/starfive-tech/linux/tree/JH7110_VisionFive2_upstream
Best regards,
Hal
